L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
IXFP5N100PM

IXFP5N100PM

Product Overview

Category

The IXFP5N100PM belongs to the category of power MOSFETs.

Use

It is used for high-voltage, high-speed power switching applications.

Characteristics

  • High voltage capability
  • Low gate charge
  • Fast switching speed
  • Low on-resistance

Package

The IXFP5N100PM is typically available in a TO-220 package.

Essence

This MOSFET is essential for efficient power management and control in various electronic systems.

Packaging/Quantity

The IXFP5N100PM is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Voltage Rating: 1000V
  • Current Rating: 5A
  • RDS(ON): 1.4Ω
  • Gate Charge: 30nC
  • Operating Temperature: -55°C to 150°C

Detailed Pin Configuration

The pin configuration of the IXFP5N100PM typically includes the following pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High voltage capability allows for use in high-power applications.
  • Low gate charge enables fast switching, reducing power loss.
  • Low on-resistance minimizes conduction losses.

Advantages

  • Suitable for high-voltage applications
  • Fast switching speed
  • Low power dissipation

Disadvantages

  • Higher cost compared to lower voltage MOSFETs
  • May require additional circuitry for driving due to high gate charge

Working Principles

The IXFP5N100PM operates based on the principles of field-effect transistors, utilizing the control of electric fields to modulate the conductivity of the device.

Detailed Application Field Plans

The IXFP5N100PM is commonly used in: - Switching power supplies - Motor drives - Inverters - Industrial equipment

Detailed and Complete Alternative Models

Some alternative models to the IXFP5N100PM include: - IRFP460: Similar voltage and current ratings - FDPF5N50NZ: Lower voltage rating but similar current capability - STW20NM60: Higher current rating with comparable voltage capability

In conclusion, the IXFP5N100PM is a high-voltage power MOSFET with fast switching characteristics, making it suitable for various power management applications across different industries.

[Word count: 366]

Énumérez 10 questions et réponses courantes liées à l'application de IXFP5N100PM dans les solutions techniques

  1. What is the maximum voltage rating of IXFP5N100PM?

    • The maximum voltage rating of IXFP5N100PM is 1000V.
  2. What is the maximum current rating of IXFP5N100PM?

    • The maximum current rating of IXFP5N100PM is 5A.
  3. What type of package does IXFP5N100PM come in?

    • IXFP5N100PM comes in a TO-220 package.
  4. What are the typical applications for IXFP5N100PM?

    • Typical applications for IXFP5N100PM include power supplies, motor drives, and inverters.
  5. What is the on-state resistance of IXFP5N100PM?

    • The on-state resistance of IXFP5N100PM is typically around 1.1 ohms.
  6. Is IXFP5N100PM suitable for high-frequency switching applications?

    • Yes, IXFP5N100PM is suitable for high-frequency switching applications.
  7. Does IXFP5N100PM have built-in protection features?

    • IXFP5N100PM does not have built-in protection features and may require external circuitry for protection.
  8. What is the operating temperature range of IXFP5N100PM?

    • The operating temperature range of IXFP5N100PM is typically -55°C to 150°C.
  9. Can IXFP5N100PM be used in parallel to increase current handling capability?

    • Yes, IXFP5N100PM can be used in parallel to increase current handling capability.
  10. Are there any recommended heat sink requirements for IXFP5N100PM?

    • It is recommended to use a heat sink with appropriate thermal resistance when using IXFP5N100PM to ensure proper thermal management.