Torex Semiconductor Ltd
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
XC6124D740ER-G
Voir les détails DataSheets

XC6124D740ER-G

Product Overview

Category

XC6124D740ER-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Package: ER-G
  • Essence: Voltage regulator
  • Packaging/Quantity: Varies depending on supplier

Specifications

The specifications of XC6124D740ER-G are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 1.8V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of XC6124D740ER-G is as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

XC6124D740ER-G offers the following functional features:

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages: - Low dropout voltage ensures efficient voltage regulation. - Low quiescent current minimizes power consumption. - Overcurrent, thermal shutdown, and short-circuit protections enhance reliability.

Disadvantages: - Limited maximum output current may restrict certain applications. - Specific input and output voltage requirements may not suit all scenarios.

Working Principles

XC6124D740ER-G operates based on a linear voltage regulation principle. It regulates the output voltage by adjusting the resistance between the input and output terminals, ensuring a stable output voltage despite variations in the input voltage.

Detailed Application Field Plans

XC6124D740ER-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Consumer electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124D740ER-G are: - XC6206P332MR-G - LM1117IMPX-1.8/NOPB - MCP1700T-1802E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 274 words

Énumérez 10 questions et réponses courantes liées à l'application de XC6124D740ER-G dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of XC6124D740ER-G in technical solutions:

  1. Question: What is XC6124D740ER-G?
    - Answer: XC6124D740ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6124D740ER-G?
    - Answer: The operating voltage range of XC6124D740ER-G is from 0.7V to 6.0V.

  3. Question: How does XC6124D740ER-G work?
    - Answer: XC6124D740ER-G continuously monitors the input voltage and compares it with a fixed reference voltage. When the input voltage falls below the reference voltage, it triggers an output signal.

  4. Question: What is the output type of XC6124D740ER-G?
    - Answer: XC6124D740ER-G has an open-drain output type, which means it can be connected to other devices or circuits for further processing.

  5. Question: What is the typical quiescent current consumption of XC6124D740ER-G?
    - Answer: The typical quiescent current consumption of XC6124D740ER-G is very low, usually around 1.0µA.

  6. Question: Can XC6124D740ER-G be used in battery-powered applications?
    - Answer: Yes, XC6124D740ER-G is suitable for battery-powered applications due to its low quiescent current consumption.

  7. Question: What is the hysteresis voltage of XC6124D740ER-G?
    - Answer: The hysteresis voltage of XC6124D740ER-G is typically 0.1V, which helps to prevent output oscillation near the threshold voltage.

  8. Question: What is the temperature range for operating XC6124D740ER-G?
    - Answer: XC6124D740ER-G can operate within a temperature range of -40°C to +85°C.

  9. Question: Can XC6124D740ER-G be used in automotive applications?
    - Answer: Yes, XC6124D740ER-G is suitable for automotive applications as it meets the necessary requirements for automotive electronics.

  10. Question: Are there any additional features or protections provided by XC6124D740ER-G?
    - Answer: Yes, XC6124D740ER-G includes built-in overvoltage protection and a delay circuit to prevent false triggering during power-on or power-off transitions.

Please note that these answers are general and may vary depending on the specific application and usage scenario. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.