Torex Semiconductor Ltd
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
XC6124D735MR-G
Voir les détails DataSheets

XC6124D735MR-G

Product Overview

Category

XC6124D735MR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

  • Voltage regulation
  • Stabilization
  • Compact size
  • High efficiency

Package

XC6124D735MR-G comes in a small surface-mount package.

Essence

The essence of XC6124D735MR-G is to provide a stable and regulated voltage supply to electronic devices.

Packaging/Quantity

XC6124D735MR-G is typically packaged in reels and is available in quantities of 1000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124D735MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Small form factor
  • High efficiency
  • Wide input voltage range
  • Overcurrent and short-circuit protection

Disadvantages

  • Limited maximum output current (150mA)

Working Principles

XC6124D735MR-G operates by regulating the input voltage to a stable output voltage of 3.3V. It achieves this through internal circuitry that adjusts the voltage based on the input and load conditions. The device continuously monitors the output voltage and adjusts it to maintain a stable supply.

Detailed Application Field Plans

XC6124D735MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124D735MR-G are: - XC6206P332MR - LM1117MPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar functionality and specifications, providing options for different design requirements.

In conclusion, XC6124D735MR-G is a voltage regulator that provides stable and regulated voltage supply to electronic circuits. Its compact size, high efficiency, and wide input voltage range make it suitable for various applications. However, its limited maximum output current should be taken into consideration when designing circuits with higher power requirements.

Énumérez 10 questions et réponses courantes liées à l'application de XC6124D735MR-G dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of XC6124D735MR-G in technical solutions:

  1. Q: What is XC6124D735MR-G? A: XC6124D735MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6124D735MR-G? A: The operating voltage range of XC6124D735MR-G is from 0.7V to 6.0V.

  3. Q: What is the output type of XC6124D735MR-G? A: XC6124D735MR-G has an open-drain output type, which means it can sink current but cannot source current.

  4. Q: What is the typical quiescent current consumption of XC6124D735MR-G? A: The typical quiescent current consumption of XC6124D735MR-G is around 1.0µA.

  5. Q: Can XC6124D735MR-G be used for undervoltage detection? A: Yes, XC6124D735MR-G can be used for undervoltage detection. It has a built-in voltage reference and comparator to monitor the input voltage.

  6. Q: What is the accuracy of the voltage detection threshold in XC6124D735MR-G? A: The accuracy of the voltage detection threshold in XC6124D735MR-G is typically ±1.5%.

  7. Q: Does XC6124D735MR-G have a hysteresis function? A: Yes, XC6124D735MR-G has a built-in hysteresis function to prevent output oscillation near the detection threshold.

  8. Q: Can XC6124D735MR-G be used in battery-powered applications? A: Yes, XC6124D735MR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  9. Q: What is the maximum operating temperature range of XC6124D735MR-G? A: The maximum operating temperature range of XC6124D735MR-G is from -40°C to +85°C.

  10. Q: What is the package type of XC6124D735MR-G? A: XC6124D735MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

Please note that these answers are based on general information about XC6124D735MR-G and may vary depending on specific datasheet specifications.