Torex Semiconductor Ltd
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
XC6124D442MR-G
Voir les détails DataSheets

XC6124D442MR-G

Product Overview

Category

XC6124D442MR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Small size and lightweight
  • Low power consumption
  • High precision voltage regulation
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124D442MR-G is available in a small surface mount package.

Essence

The essence of XC6124D442MR-G lies in its ability to regulate voltage efficiently and accurately.

Packaging/Quantity

It is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Output Current: 150mA (max)
  • Dropout Voltage: 200mV (typ)
  • Quiescent Current: 30μA (typ)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124D442MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6124D442MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the output current to prevent damage.
  • Thermal shutdown protection: In case of excessive heat, the regulator shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • Compact size makes it suitable for space-constrained applications.
  • Low power consumption helps conserve energy.
  • High precision voltage regulation ensures accurate output.
  • Wide input voltage range allows for versatile usage.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage can cause a slight voltage drop across the regulator.

Working Principles

XC6124D442MR-G operates on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. The enable pin (EN) can be used to turn the regulator on or off.

Detailed Application Field Plans

XC6124D442MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124D442MR-G are: - LM1117-3.3: A popular linear voltage regulator with similar specifications. - AP2112K-3.3: Another low dropout voltage regulator suitable for various applications. - MCP1700-3302E: A compact and efficient voltage regulator with a wide input voltage range.

These alternative models offer similar functionality and can be used as substitutes depending on specific requirements.

Word count: 345 words

Énumérez 10 questions et réponses courantes liées à l'application de XC6124D442MR-G dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of XC6124D442MR-G in technical solutions:

  1. Question: What is XC6124D442MR-G?
    Answer: XC6124D442MR-G is a voltage detector IC manufactured by Torex Semiconductor. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6124D442MR-G?
    Answer: The operating voltage range of XC6124D442MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124D442MR-G detect voltage levels?
    Answer: XC6124D442MR-G uses a built-in voltage reference and comparator to compare the input voltage with a preset threshold. When the input voltage drops below this threshold, it triggers an output signal.

  4. Question: What is the output type of XC6124D442MR-G?
    Answer: XC6124D442MR-G has an open-drain output, which means it can sink current but cannot source current. It requires an external pull-up resistor to provide a logic-level output.

  5. Question: What is the typical quiescent current consumption of XC6124D442MR-G?
    Answer: The typical quiescent current consumption of XC6124D442MR-G is very low, usually around 1.0µA.

  6. Question: Can XC6124D442MR-G be used in battery-powered applications?
    Answer: Yes, XC6124D442MR-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps to conserve battery life.

  7. Question: What is the accuracy of the voltage detection threshold in XC6124D442MR-G?
    Answer: The accuracy of the voltage detection threshold in XC6124D442MR-G is typically ±1.5%.

  8. Question: Can XC6124D442MR-G be used for overvoltage protection?
    Answer: No, XC6124D442MR-G is designed specifically for undervoltage detection. It does not provide overvoltage protection.

  9. Question: What is the temperature range of operation for XC6124D442MR-G?
    Answer: XC6124D442MR-G can operate within a temperature range of -40°C to +85°C.

  10. Question: Is XC6124D442MR-G available in different package options?
    Answer: Yes, XC6124D442MR-G is available in various package options, including SOT-25 and USP-4B, providing flexibility for different application requirements.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications.