Torex Semiconductor Ltd
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
XC6124C650MR-G
Voir les détails DataSheets

XC6124C650MR-G

Product Overview

Category

XC6124C650MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: The XC6124C650MR-G comes in a small SOT-25 package.
  • Essence: This voltage regulator is designed to provide stable and regulated voltage output.
  • Packaging/Quantity: It is available in tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

The specifications of XC6124C650MR-G are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6124C650MR-G has three pins:

  1. VIN: Input voltage pin
  2. VOUT: Output voltage pin
  3. GND: Ground pin

Functional Features

  • Low dropout voltage: The XC6124C650MR-G exhibits a low dropout voltage, ensuring efficient regulation even when the input voltage is close to the desired output voltage.
  • Low quiescent current: With a low quiescent current, this voltage regulator minimizes power consumption when the load is light or idle.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard the circuit from excessive current flow.

Advantages and Disadvantages

Advantages

  • Small package size allows for space-saving integration into compact electronic devices.
  • Wide input voltage range enables compatibility with various power sources.
  • Low dropout voltage ensures efficient voltage regulation.
  • Overcurrent protection enhances circuit safety.

Disadvantages

  • Limited output current capacity may restrict its use in high-power applications.
  • Temperature range limitations may not be suitable for extreme temperature environments.

Working Principles

The XC6124C650MR-G operates based on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This ensures that the output voltage remains stable even when the input voltage fluctuates.

Detailed Application Field Plans

The XC6124C650MR-G is commonly used in various electronic devices, including:

  1. Battery-powered devices: It can regulate the voltage supplied by batteries to ensure consistent performance of the connected components.
  2. Portable electronics: The small package size makes it suitable for integration into portable devices such as smartphones, tablets, and wearable devices.
  3. IoT devices: It can be utilized in Internet of Things (IoT) devices that require stable voltage supply for reliable operation.

Detailed and Complete Alternative Models

Some alternative models to XC6124C650MR-G include:

  1. XC6206P332MR-G: Similar voltage regulator with a different output voltage (3.3V).
  2. XC6206P332PR-G: Same output voltage as XC6124C650MR-G but with a different package (SOT-89).
  3. XC6206P332DR-G: Voltage regulator with the same output voltage and package as XC6124C650MR-G but with higher output current capacity (300mA).

These alternative models provide flexibility in choosing the most suitable voltage regulator based on specific requirements.

Word count: 446 words

Énumérez 10 questions et réponses courantes liées à l'application de XC6124C650MR-G dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of XC6124C650MR-G in technical solutions:

  1. Q: What is XC6124C650MR-G? A: XC6124C650MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6124C650MR-G? A: The operating voltage range of XC6124C650MR-G is from 0.65V to 6.0V.

  3. Q: How does XC6124C650MR-G work? A: XC6124C650MR-G continuously monitors the input voltage and provides a reset signal when the voltage falls below a certain threshold. This can be used to trigger system resets or other actions.

  4. Q: What is the typical quiescent current consumption of XC6124C650MR-G? A: The typical quiescent current consumption of XC6124C650MR-G is very low, typically around 1.0µA.

  5. Q: Can XC6124C650MR-G be used in battery-powered applications? A: Yes, XC6124C650MR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  6. Q: What is the output type of XC6124C650MR-G? A: XC6124C650MR-G has an open-drain output, which means it requires an external pull-up resistor to provide a logic-level output.

  7. Q: What is the maximum voltage that XC6124C650MR-G can tolerate on its input pin? A: XC6124C650MR-G can tolerate a maximum voltage of 10V on its input pin.

  8. Q: Can XC6124C650MR-G be used in automotive applications? A: Yes, XC6124C650MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  9. Q: Does XC6124C650MR-G have built-in hysteresis? A: Yes, XC6124C650MR-G has built-in hysteresis to prevent oscillation and provide stable operation.

  10. Q: What is the package type of XC6124C650MR-G? A: XC6124C650MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.

Please note that these answers are based on general information about XC6124C650MR-G and may vary depending on specific application requirements.