Torex Semiconductor Ltd
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
XC6123F745MR-G
Voir les détails DataSheets

XC6123F745MR-G

Product Overview

Category

XC6123F745MR-G belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact package size
  • Low power consumption
  • High efficiency

Package

XC6123F745MR-G is available in a small form factor package, which makes it suitable for space-constrained applications.

Essence

The essence of XC6123F745MR-G lies in its ability to regulate voltage and manage power efficiently, ensuring stable and reliable operation of electronic devices.

Packaging/Quantity

This IC is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 0.8V - 5.0V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 200mV @ 100mA
  • Quiescent Current: 35µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123F745MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6123F745MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Power management: It efficiently manages power consumption, reducing energy waste.
  • Overcurrent protection: The IC includes built-in protection against excessive current flow, safeguarding connected devices.
  • Thermal shutdown: In case of overheating, the IC automatically shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into various electronic devices.
  • Low power consumption contributes to energy efficiency.
  • High efficiency ensures optimal performance.
  • Overcurrent protection enhances device safety.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage may affect performance in low input voltage scenarios.

Working Principles

XC6123F745MR-G operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. The enable pin allows for easy on/off control of the IC.

Detailed Application Field Plans

XC6123F745MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6123F745MR-G are: - XC6123F745ML-G - XC6123F745NR-G - XC6123F745NL-G - XC6123F745PR-G - XC6123F745PL-G

These models differ in package type, pin configuration, or other minor specifications while providing comparable voltage regulation and power management capabilities.

Word count: 366 words

Énumérez 10 questions et réponses courantes liées à l'application de XC6123F745MR-G dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of XC6123F745MR-G in technical solutions:

  1. Question: What is XC6123F745MR-G?
    - Answer: XC6123F745MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6123F745MR-G?
    - Answer: The operating voltage range of XC6123F745MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6123F745MR-G work?
    - Answer: XC6123F745MR-G works by comparing the input voltage with a reference voltage internally set within the IC. When the input voltage drops below the reference voltage, it triggers the output signal.

  4. Question: What is the output type of XC6123F745MR-G?
    - Answer: XC6123F745MR-G has an open-drain output type, which means it can sink current but cannot source current. An external pull-up resistor is required to pull the output signal high.

  5. Question: What is the typical quiescent current consumption of XC6123F745MR-G?
    - Answer: The typical quiescent current consumption of XC6123F745MR-G is very low, usually around 1.0µA.

  6. Question: Can XC6123F745MR-G be used in battery-powered applications?
    - Answer: Yes, XC6123F745MR-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps to conserve battery life.

  7. Question: What is the hysteresis voltage of XC6123F745MR-G?
    - Answer: The hysteresis voltage of XC6123F745MR-G is typically 0.1V, which means the output signal will remain low until the input voltage rises above the threshold voltage plus the hysteresis voltage.

  8. Question: Can XC6123F745MR-G be used for overvoltage detection?
    - Answer: No, XC6123F745MR-G is specifically designed for undervoltage detection. It triggers the output signal when the voltage falls below the threshold voltage.

  9. Question: What is the typical response time of XC6123F745MR-G?
    - Answer: The typical response time of XC6123F745MR-G is very fast, usually around 1µs, making it suitable for applications that require quick detection and response to voltage drops.

  10. Question: Is XC6123F745MR-G available in different package options?
    - Answer: Yes, XC6123F745MR-G is available in a variety of package options, including SOT-25, SNT-4A, and USP-4B, allowing flexibility in design and integration into different applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.