Torex Semiconductor Ltd
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
XC6122E627ER-G
Voir les détails DataSheets

XC6122E627ER-G

Product Overview

Category

XC6122E627ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6122E627ER-G comes in a small surface-mount package.

Essence

The essence of XC6122E627ER-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

It is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.7V
  • Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 1μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122E627ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6122E627ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
  • Low quiescent current: The regulator consumes minimal current when no load is connected.
  • Thermal shutdown protection: It automatically shuts down to prevent damage due to excessive heat.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact electronic devices.
  • Efficient voltage regulation ensures reliable performance of connected components.
  • Low power consumption helps conserve battery life.
  • Wide operating temperature range enables usage in various environments.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight decrease in efficiency when the input voltage is close to the desired output voltage.

Working Principles

XC6122E627ER-G utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output.

Detailed Application Field Plans

XC6122E627ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122E627ER-G are: - LM317 - LT1084 - LM1117 - TPS7A4700

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 404 words

Énumérez 10 questions et réponses courantes liées à l'application de XC6122E627ER-G dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of XC6122E627ER-G in technical solutions:

  1. Question: What is XC6122E627ER-G?
    - Answer: XC6122E627ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122E627ER-G?
    - Answer: The operating voltage range of XC6122E627ER-G is typically between 0.8V and 6.0V.

  3. Question: What is the output type of XC6122E627ER-G?
    - Answer: XC6122E627ER-G has an open-drain output type, which means it can be connected to other devices or circuits for further processing.

  4. Question: What is the quiescent current consumption of XC6122E627ER-G?
    - Answer: The quiescent current consumption of XC6122E627ER-G is typically around 1.0µA, making it suitable for low-power applications.

  5. Question: Can XC6122E627ER-G detect both overvoltage and undervoltage conditions?
    - Answer: No, XC6122E627ER-G is specifically designed to detect undervoltage conditions only.

  6. Question: What is the typical voltage threshold for undervoltage detection in XC6122E627ER-G?
    - Answer: The typical voltage threshold for undervoltage detection in XC6122E627ER-G is 2.7V.

  7. Question: How does XC6122E627ER-G indicate an undervoltage condition?
    - Answer: When an undervoltage condition is detected, the output of XC6122E627ER-G goes low (logic level 0), indicating the fault condition.

  8. Question: Can XC6122E627ER-G be used in automotive applications?
    - Answer: Yes, XC6122E627ER-G is AEC-Q100 qualified and suitable for automotive applications.

  9. Question: What is the temperature range of operation for XC6122E627ER-G?
    - Answer: XC6122E627ER-G has an operating temperature range of -40°C to +85°C.

  10. Question: Is XC6122E627ER-G available in different package options?
    - Answer: Yes, XC6122E627ER-G is available in various package options, including SOT-25 and USP-4B.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.