Torex Semiconductor Ltd
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
XC6122E448ER-G
Voir les détails DataSheets

XC6122E448ER-G

Product Overview

Category

XC6122E448ER-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • Wide input voltage range

Package

XC6122E448ER-G is available in a small surface-mount package.

Essence

The essence of XC6122E448ER-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

It is typically packaged in reels or tubes, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.48V
  • Output Current: Up to 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122E448ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6122E448ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: The regulator automatically shuts down if the temperature exceeds a certain threshold, preventing damage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Wide input voltage range makes it versatile for various applications.
  • Low power consumption helps conserve energy.
  • Overcurrent protection enhances device safety.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6122E448ER-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for input voltage variations.

Detailed Application Field Plans

XC6122E448ER-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable technology - Industrial automation systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122E448ER-G are: - XC6206P448MR-G - LM1117IMPX-4.48/NOPB - MCP1700T-4502E/TT

These models offer similar voltage regulation capabilities and can be suitable replacements depending on specific requirements.

In conclusion, XC6122E448ER-G is a compact voltage regulator with excellent voltage regulation characteristics. Its small size, low power consumption, and wide input voltage range make it suitable for various applications. However, its limited output current and dropout voltage should be considered when selecting an appropriate model.

Énumérez 10 questions et réponses courantes liées à l'application de XC6122E448ER-G dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of XC6122E448ER-G in technical solutions:

  1. Question: What is XC6122E448ER-G?
    Answer: XC6122E448ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122E448ER-G?
    Answer: The operating voltage range of XC6122E448ER-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6122E448ER-G work?
    Answer: XC6122E448ER-G works by continuously monitoring the input voltage and comparing it to a preset threshold. When the input voltage falls below or rises above the threshold, the output of the IC changes state, indicating a power supply fault.

  4. Question: What is the output configuration of XC6122E448ER-G?
    Answer: XC6122E448ER-G has an open-drain output configuration, which means that it can sink current but cannot source current. An external pull-up resistor is required to provide the output voltage level.

  5. Question: What is the typical quiescent current consumption of XC6122E448ER-G?
    Answer: The typical quiescent current consumption of XC6122E448ER-G is very low, usually around 1.0µA.

  6. Question: Can XC6122E448ER-G be used for undervoltage and overvoltage detection?
    Answer: Yes, XC6122E448ER-G can be used for both undervoltage and overvoltage detection. It has separate thresholds for each condition, allowing it to monitor both situations.

  7. Question: What is the typical accuracy of XC6122E448ER-G?
    Answer: The typical accuracy of XC6122E448ER-G is ±1.5% for the detection voltage threshold.

  8. Question: Can XC6122E448ER-G be used in battery-powered applications?
    Answer: Yes, XC6122E448ER-G can be used in battery-powered applications. Its low quiescent current consumption makes it suitable for power-sensitive devices.

  9. Question: Does XC6122E448ER-G have any built-in delay or hysteresis?
    Answer: Yes, XC6122E448ER-G has a built-in delay of approximately 200ms and hysteresis of typically 100mV. This helps prevent false triggering due to voltage fluctuations.

  10. Question: What package does XC6122E448ER-G come in?
    Answer: XC6122E448ER-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.