Torex Semiconductor Ltd
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
XC6122D446ER-G
Voir les détails DataSheets

XC6122D446ER-G

Product Overview

Category

XC6122D446ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Small size and lightweight
  • Low power consumption
  • High precision voltage regulation
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6122D446ER-G is available in a compact SOT-23-5 package.

Essence

The essence of XC6122D446ER-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

It is typically packaged in reels, with each reel containing a specific quantity of XC6122D446ER-G units.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.8V - 5.0V
  • Output Current: 100mA (maximum)
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122D446ER-G has five pins arranged as follows:

```

| | --| |-- |____| ```

Pin 1: VIN (Input Voltage) Pin 2: GND (Ground) Pin 3: EN (Enable) Pin 4: NC (No Connection) Pin 5: VOUT (Output Voltage)

Functional Features

  • Voltage regulation within a specified range
  • Enable/disable control through the EN pin
  • Overcurrent protection safeguards against excessive current flow
  • Thermal shutdown protection prevents overheating

Advantages and Disadvantages

Advantages

  • Compact size and lightweight make it suitable for space-constrained applications
  • Low power consumption helps conserve energy
  • High precision voltage regulation ensures stable performance of connected devices
  • Wide input voltage range allows compatibility with various power sources

Disadvantages

  • Limited output current capacity may not be sufficient for high-power applications
  • Dropout voltage may cause a slight voltage drop across the regulator

Working Principles

XC6122D446ER-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, regardless of changes in the input voltage or load conditions.

Detailed Application Field Plans

XC6122D446ER-G finds application in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Automotive electronics - Industrial equipment

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122D446ER-G are: - XC6206P332MR-G - XC6206P502MR-G - XC6206P182MR-G - XC6206P252MR-G - XC6206P302MR-G

These models offer similar functionality and characteristics, providing options for different voltage and current requirements.

Word count: 413 words

Énumérez 10 questions et réponses courantes liées à l'application de XC6122D446ER-G dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of XC6122D446ER-G in technical solutions:

  1. Question: What is XC6122D446ER-G?
    Answer: XC6122D446ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122D446ER-G?
    Answer: The operating voltage range of XC6122D446ER-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6122D446ER-G work?
    Answer: XC6122D446ER-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds a certain threshold, it triggers an output signal.

  4. Question: What is the output type of XC6122D446ER-G?
    Answer: XC6122D446ER-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor.

  5. Question: What is the typical quiescent current consumption of XC6122D446ER-G?
    Answer: The typical quiescent current consumption of XC6122D446ER-G is very low, usually around 1.0µA.

  6. Question: Can XC6122D446ER-G be used for undervoltage and overvoltage detection?
    Answer: Yes, XC6122D446ER-G can be used for both undervoltage and overvoltage detection, depending on how it is configured.

  7. Question: What is the accuracy of the voltage detection threshold in XC6122D446ER-G?
    Answer: The accuracy of the voltage detection threshold in XC6122D446ER-G is typically ±1.5%.

  8. Question: Can XC6122D446ER-G be used in battery-powered applications?
    Answer: Yes, XC6122D446ER-G can be used in battery-powered applications due to its low quiescent current consumption.

  9. Question: Is XC6122D446ER-G suitable for automotive applications?
    Answer: Yes, XC6122D446ER-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  10. Question: What are some typical applications of XC6122D446ER-G?
    Answer: Some typical applications of XC6122D446ER-G include power supply monitoring in consumer electronics, industrial equipment, automotive systems, and battery-powered devices.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.