Torex Semiconductor Ltd
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
XC6122C716MR-G
Voir les détails DataSheets

XC6122C716MR-G

Product Overview

Category

XC6122C716MR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • Wide input voltage range

Package

XC6122C716MR-G is available in a small surface-mount package.

Essence

The essence of XC6122C716MR-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

XC6122C716MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122C716MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6122C716MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to the circuitry.
  • Thermal shutdown: In case of excessive temperature, the device shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Low power consumption helps conserve energy.
  • Wide input voltage range provides flexibility in various applications.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6122C716MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for any input voltage variations.

Detailed Application Field Plans

XC6122C716MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122C716MR-G are: - LM317: A popular linear voltage regulator with adjustable output voltage. - LT1084: A high-current, low-dropout voltage regulator suitable for power-hungry applications. - TPS7A4700: A high-performance, low-noise voltage regulator designed for precision applications.

These alternative models offer different features and specifications, allowing designers to choose the most suitable option for their specific requirements.

Word count: 410 words

Énumérez 10 questions et réponses courantes liées à l'application de XC6122C716MR-G dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of XC6122C716MR-G in technical solutions:

  1. Q: What is XC6122C716MR-G? A: XC6122C716MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6122C716MR-G? A: The operating voltage range of XC6122C716MR-G is typically between 0.7V and 6.0V.

  3. Q: How does XC6122C716MR-G work? A: XC6122C716MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds a certain threshold, it triggers an output signal to indicate the change in voltage level.

  4. Q: What is the output type of XC6122C716MR-G? A: XC6122C716MR-G has an open-drain output type, which means it can sink current but cannot source current. It requires an external pull-up resistor to provide a logic high level.

  5. Q: What is the typical quiescent current consumption of XC6122C716MR-G? A: The typical quiescent current consumption of XC6122C716MR-G is very low, usually around 1.0µA.

  6. Q: Can XC6122C716MR-G be used for undervoltage and overvoltage detection? A: Yes, XC6122C716MR-G can be used for both undervoltage and overvoltage detection, depending on how it is configured.

  7. Q: What is the accuracy of the voltage detection threshold in XC6122C716MR-G? A: The accuracy of the voltage detection threshold in XC6122C716MR-G is typically ±1.5%.

  8. Q: Can XC6122C716MR-G be used in battery-powered applications? A: Yes, XC6122C716MR-G can be used in battery-powered applications as it has a low quiescent current and wide operating voltage range.

  9. Q: Does XC6122C716MR-G have built-in hysteresis? A: Yes, XC6122C716MR-G has built-in hysteresis, which helps to prevent oscillation or chattering of the output signal when the input voltage is near the detection threshold.

  10. Q: What are some common applications of XC6122C716MR-G? A: XC6122C716MR-G is commonly used in various technical solutions such as battery-powered devices, power management systems, portable electronics, automotive electronics, and industrial control systems for voltage monitoring and protection purposes.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.