Torex Semiconductor Ltd
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
XC6122C533MR-G
Voir les détails DataSheets

XC6122C533MR-G

Product Overview

Category

XC6122C533MR-G belongs to the category of voltage regulators.

Use

It is commonly used for voltage regulation in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • Wide input voltage range
  • High efficiency

Package

XC6122C533MR-G is available in a small surface-mount package.

Essence

The essence of XC6122C533MR-G lies in its ability to regulate voltage efficiently and reliably.

Packaging/Quantity

XC6122C533MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 1µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122C533MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6122C533MR-G ensures a stable output voltage of 3.3V regardless of input voltage fluctuations.
  • Low dropout voltage: The regulator maintains a low dropout voltage of 200mV, minimizing power loss.
  • Low quiescent current: With a quiescent current of only 1µA, the regulator consumes minimal power during standby mode.
  • Thermal shutdown protection: The device incorporates thermal shutdown protection to prevent overheating.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • Wide input voltage range enables compatibility with various power sources.
  • High efficiency results in minimal power dissipation.
  • Low quiescent current prolongs battery life in portable applications.

Disadvantages

  • Limited output current of 100mA may not be sufficient for high-power applications.
  • Dropout voltage of 200mV may affect performance in low-voltage scenarios.

Working Principles

XC6122C533MR-G operates based on the principle of a linear voltage regulator. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage of 3.3V. The regulator achieves this by controlling the flow of current between the input and output terminals.

Detailed Application Field Plans

XC6122C533MR-G finds application in various electronic devices, including but not limited to: - Portable consumer electronics - IoT devices - Battery-powered systems - Embedded systems - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122C533MR-G are: - LM1117-3.3 - MCP1700-3302E/TO - AP2112K-3.3TRG1 - TS2937CP-3.3

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 399 words

Énumérez 10 questions et réponses courantes liées à l'application de XC6122C533MR-G dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of XC6122C533MR-G in technical solutions:

  1. Q: What is XC6122C533MR-G? A: XC6122C533MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6122C533MR-G? A: The operating voltage range of XC6122C533MR-G is from 0.8V to 6.0V.

  3. Q: How does XC6122C533MR-G work? A: XC6122C533MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below a certain threshold, it triggers an output signal, indicating a low voltage condition.

  4. Q: What is the typical quiescent current consumption of XC6122C533MR-G? A: The typical quiescent current consumption of XC6122C533MR-G is around 1.0µA.

  5. Q: Can XC6122C533MR-G be used in battery-powered applications? A: Yes, XC6122C533MR-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps conserve battery life.

  6. Q: What is the output configuration of XC6122C533MR-G? A: XC6122C533MR-G has an open-drain output configuration, which means it requires an external pull-up resistor to provide a logic high level.

  7. Q: What is the maximum output sink current of XC6122C533MR-G? A: The maximum output sink current of XC6122C533MR-G is 10mA.

  8. Q: Can XC6122C533MR-G be used for overvoltage detection? A: No, XC6122C533MR-G is specifically designed for undervoltage detection and does not support overvoltage detection.

  9. Q: Is XC6122C533MR-G suitable for automotive applications? A: Yes, XC6122C533MR-G is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability and performance.

  10. Q: What package does XC6122C533MR-G come in? A: XC6122C533MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.