Torex Semiconductor Ltd
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
XC6121D332ER-G
Voir les détails DataSheets

XC6121D332ER-G

Product Overview

Category

XC6121D332ER-G belongs to the category of voltage regulators.

Use

It is commonly used for voltage regulation in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6121D332ER-G is available in a small surface mount package.

Essence

The essence of XC6121D332ER-G lies in its ability to regulate voltage levels efficiently and reliably.

Packaging/Quantity

XC6121D332ER-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6121D332ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Voltage regulation: XC6121D332ER-G ensures a stable output voltage of 3.3V regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Low quiescent current: The regulator consumes minimal current when not actively regulating the voltage.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact electronic devices.
  • Efficient voltage regulation ensures stable performance of connected components.
  • Low power consumption helps conserve energy.
  • Overcurrent protection enhances the safety of the circuit.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage of 200mV may affect the efficiency in certain scenarios.

Working Principles

XC6121D332ER-G utilizes a feedback mechanism to maintain a constant output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly. This feedback loop ensures that the output voltage remains stable even when the input voltage varies.

Detailed Application Field Plans

XC6121D332ER-G finds application in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6121D332ER-G are: - LM1117-3.3: A popular linear voltage regulator with similar specifications. - AP2112-3.3: Another voltage regulator known for its low dropout voltage. - TPS79933: A high-performance LDO voltage regulator suitable for demanding applications.

These alternative models offer similar functionality and can be used as substitutes depending on specific requirements.

Word count: 346 words

Énumérez 10 questions et réponses courantes liées à l'application de XC6121D332ER-G dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of XC6121D332ER-G in technical solutions:

Q1: What is XC6121D332ER-G? A1: XC6121D332ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

Q2: What is the operating voltage range of XC6121D332ER-G? A2: The operating voltage range of XC6121D332ER-G is typically between 0.8V and 6.0V.

Q3: What is the output type of XC6121D332ER-G? A3: XC6121D332ER-G has an open-drain output type, which means it can sink current but cannot source current.

Q4: What is the typical quiescent current consumption of XC6121D332ER-G? A4: The typical quiescent current consumption of XC6121D332ER-G is very low, usually around 1.0µA.

Q5: How accurate is the voltage detection of XC6121D332ER-G? A5: The voltage detection accuracy of XC6121D332ER-G is typically ±1.0%.

Q6: Can XC6121D332ER-G be used for overvoltage protection? A6: No, XC6121D332ER-G is specifically designed for undervoltage detection and does not provide overvoltage protection.

Q7: What is the response time of XC6121D332ER-G? A7: The response time of XC6121D332ER-G is typically 200µs.

Q8: Can XC6121D332ER-G be used in automotive applications? A8: Yes, XC6121D332ER-G is AEC-Q100 qualified and suitable for automotive applications.

Q9: What is the temperature range of XC6121D332ER-G? A9: The operating temperature range of XC6121D332ER-G is typically -40°C to +85°C.

Q10: How is XC6121D332ER-G packaged? A10: XC6121D332ER-G is available in a small SOT-25 package, which is a surface-mount package with 5 pins.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications.