Torex Semiconductor Ltd
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
XC6120N222NR-G
Voir les détails DataSheets

XC6120N222NR-G

Product Overview

Category

XC6120N222NR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6120N222NR-G is available in a small surface-mount package.

Essence

The essence of XC6120N222NR-G lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

The product is typically packaged in reels and is available in various quantities.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.2V
  • Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6120N222NR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device automatically shuts down if the output current exceeds the specified limit.
  • Thermal shutdown protection: In case of excessive temperature, the regulator enters a thermal shutdown mode to prevent damage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • High efficiency results in minimal power loss.
  • Wide input voltage range provides flexibility in various applications.
  • Overcurrent and thermal protection enhance reliability.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Dropout voltage may affect performance in low input voltage scenarios.

Working Principles

XC6120N222NR-G operates on the principle of a linear voltage regulator. It uses a feedback mechanism to maintain a constant output voltage by adjusting its internal resistance. When the input voltage exceeds the desired output voltage, the regulator reduces its resistance, and vice versa.

Detailed Application Field Plans

XC6120N222NR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

  1. XC6206P332MR-G: Similar voltage regulator with a different output voltage (3.3V).
  2. XC6220B182MR-G: Voltage regulator with a higher output current capacity (500mA).
  3. XC6219B122MR-G: Voltage regulator with a lower dropout voltage (100mV).

These alternative models can be considered based on specific application requirements.

Word count: 346 words

Énumérez 10 questions et réponses courantes liées à l'application de XC6120N222NR-G dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of XC6120N222NR-G in technical solutions:

  1. Q: What is XC6120N222NR-G? A: XC6120N222NR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6120N222NR-G? A: The operating voltage range of XC6120N222NR-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6120N222NR-G work? A: XC6120N222NR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below a certain threshold, it triggers an output signal, indicating a low voltage condition.

  4. Q: What is the output type of XC6120N222NR-G? A: XC6120N222NR-G has an open-drain output type, which means it can sink current but cannot source current.

  5. Q: What is the typical quiescent current consumption of XC6120N222NR-G? A: The typical quiescent current consumption of XC6120N222NR-G is very low, usually around 1.0µA.

  6. Q: Can XC6120N222NR-G be used for undervoltage and overvoltage detection? A: No, XC6120N222NR-G is specifically designed for undervoltage detection only. It does not support overvoltage detection.

  7. Q: What is the accuracy of the undervoltage detection threshold in XC6120N222NR-G? A: The accuracy of the undervoltage detection threshold in XC6120N222NR-G is typically ±2.0%.

  8. Q: Can XC6120N222NR-G be used in automotive applications? A: Yes, XC6120N222NR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  9. Q: What is the temperature range in which XC6120N222NR-G can operate? A: XC6120N222NR-G can operate within a temperature range of -40°C to +105°C.

  10. Q: What package options are available for XC6120N222NR-G? A: XC6120N222NR-G is available in various package options, including SOT-23-5 and USP-6B.