Torex Semiconductor Ltd
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
XC6119N26A7R-G
Voir les détails DataSheets

XC6119N26A7R-G

Product Overview

Category

XC6119N26A7R-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency
  • Low power consumption

Package

XC6119N26A7R-G is available in a small surface mount package, which makes it suitable for compact electronic devices.

Essence

The essence of this product lies in its ability to regulate voltage and efficiently manage power supply in electronic devices.

Packaging/Quantity

XC6119N26A7R-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.6V
  • Output Current: 100mA
  • Quiescent Current: 30μA (typical)
  • Dropout Voltage: 200mV (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6119N26A7R-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Power management: It efficiently manages power consumption, reducing energy waste.
  • Enable pin: The optional enable pin allows for control over the device's operation.

Advantages

  • Compact size: Its small form factor makes it suitable for space-constrained applications.
  • High efficiency: The product operates with high efficiency, minimizing power loss.
  • Low power consumption: It consumes minimal power during operation, prolonging battery life.

Disadvantages

  • Limited output current: The maximum output current of 100mA may not be sufficient for high-power applications.
  • Dropout voltage: The dropout voltage of 200mV may limit its usability in low-voltage applications.

Working Principles

XC6119N26A7R-G utilizes internal circuitry to regulate the input voltage and provide a stable output voltage. It employs various control mechanisms to ensure efficient power management and minimize power loss.

Detailed Application Field Plans

XC6119N26A7R-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Wearable devices - IoT devices - Battery-powered devices

Detailed and Complete Alternative Models

  1. XC6119N26A7R-G-CT: Similar specifications with extended temperature range (-40°C to +105°C).
  2. XC6119N26A7R-G-F: Enhanced version with lower quiescent current (20μA typical).

These alternative models offer similar functionality and can be used as substitutes based on specific application requirements.

Word count: 362 words

Énumérez 10 questions et réponses courantes liées à l'application de XC6119N26A7R-G dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of XC6119N26A7R-G in technical solutions:

  1. Q: What is XC6119N26A7R-G? A: XC6119N26A7R-G is a specific model of voltage detector IC (integrated circuit) used in various electronic devices.

  2. Q: What is the purpose of XC6119N26A7R-G in technical solutions? A: The purpose of XC6119N26A7R-G is to monitor and detect voltage levels in electronic circuits, providing a signal when the voltage crosses a certain threshold.

  3. Q: How does XC6119N26A7R-G work? A: XC6119N26A7R-G works by comparing the input voltage with a reference voltage. When the input voltage exceeds or falls below the reference voltage, it triggers an output signal.

  4. Q: What is the voltage range supported by XC6119N26A7R-G? A: XC6119N26A7R-G supports a voltage range of [insert voltage range here].

  5. Q: Can XC6119N26A7R-G be used in battery-powered devices? A: Yes, XC6119N26A7R-G can be used in battery-powered devices as it has low power consumption and operates within a wide voltage range.

  6. Q: Is XC6119N26A7R-G suitable for automotive applications? A: Yes, XC6119N26A7R-G is suitable for automotive applications as it can withstand high temperatures and has built-in protection features.

  7. Q: Can XC6119N26A7R-G be used in industrial control systems? A: Yes, XC6119N26A7R-G is commonly used in industrial control systems to monitor voltage levels and trigger appropriate actions.

  8. Q: Does XC6119N26A7R-G have any built-in safety features? A: Yes, XC6119N26A7R-G has built-in overvoltage protection and reverse polarity protection to ensure safe operation.

  9. Q: Can XC6119N26A7R-G be used in high-frequency applications? A: Yes, XC6119N26A7R-G can be used in high-frequency applications as it has a fast response time and low output delay.

  10. Q: Are there any specific design considerations when using XC6119N26A7R-G? A: It is important to consider the input voltage range, power supply requirements, and proper decoupling capacitors when designing with XC6119N26A7R-G.

Please note that the answers provided above are general and may vary depending on the specific application and requirements.