Torex Semiconductor Ltd
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
XC6119C36ANR-G
Voir les détails DataSheets

XC6119C36ANR-G

Product Overview

Category

XC6119C36ANR-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact package size
  • High efficiency
  • Low power consumption

Package

XC6119C36ANR-G is available in a small form factor package, which ensures easy integration into various electronic devices.

Essence

The essence of XC6119C36ANR-G lies in its ability to regulate voltage and efficiently manage power consumption in electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a specific quantity per package depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.6V
  • Output Current: Up to 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6119C36ANR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6119C36ANR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The product incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: In case of excessive temperature, the device automatically shuts down to prevent damage.
  • Low quiescent current: The low quiescent current ensures minimal power consumption during standby mode.

Advantages and Disadvantages

Advantages

  • High efficiency in voltage regulation
  • Compact size for easy integration
  • Overcurrent protection for device safety
  • Low power consumption during standby mode

Disadvantages

  • Limited output current capacity (up to 100mA)
  • Dropout voltage may affect performance in low input voltage scenarios

Working Principles

XC6119C36ANR-G utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It continuously monitors the input voltage and adjusts its internal components to maintain a stable output voltage, even under varying load conditions.

Detailed Application Field Plans

XC6119C36ANR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6119C36ANR-G include: - XC6119C33ANR-G: Output voltage of 3.3V - XC6119C50ANR-G: Output voltage of 5.0V - XC6119C18ANR-G: Output voltage of 1.8V

These alternative models cater to different voltage requirements while maintaining similar characteristics and features.

Word count: 398 words

Énumérez 10 questions et réponses courantes liées à l'application de XC6119C36ANR-G dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of XC6119C36ANR-G in technical solutions:

  1. Q: What is XC6119C36ANR-G? A: XC6119C36ANR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6119C36ANR-G? A: The operating voltage range of XC6119C36ANR-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6119C36ANR-G help in technical solutions? A: XC6119C36ANR-G helps ensure stable operation of electronic devices by monitoring the power supply voltage and generating a reset signal to prevent erratic behavior or data corruption during power fluctuations.

  4. Q: Can XC6119C36ANR-G be used in battery-powered applications? A: Yes, XC6119C36ANR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  5. Q: What is the typical reset threshold voltage of XC6119C36ANR-G? A: The typical reset threshold voltage of XC6119C36ANR-G is 3.6V.

  6. Q: Does XC6119C36ANR-G have an adjustable reset threshold voltage? A: No, XC6119C36ANR-G has a fixed reset threshold voltage and does not offer adjustment options.

  7. Q: Can XC6119C36ANR-G generate an interrupt signal instead of a reset signal? A: No, XC6119C36ANR-G is designed to generate a reset signal and does not have an interrupt output.

  8. Q: What is the typical response time of XC6119C36ANR-G? A: The typical response time of XC6119C36ANR-G is 200µs.

  9. Q: Is XC6119C36ANR-G suitable for automotive applications? A: Yes, XC6119C36ANR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  10. Q: Can XC6119C36ANR-G be used in industrial temperature environments? A: Yes, XC6119C36ANR-G has an operating temperature range of -40°C to +105°C, making it suitable for industrial temperature environments.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6119C36ANR-G.