Torex Semiconductor Ltd
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
XC6109C14ANR-G
Voir les détails DataSheets

XC6109C14ANR-G

Product Overview

Category

XC6109C14ANR-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency

Package

XC6109C14ANR-G is available in a small outline package (SOP) format.

Essence

The essence of this product lies in its ability to regulate voltage and manage power efficiently in electronic devices.

Packaging/Quantity

XC6109C14ANR-G is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Maximum Output Current: 100mA
  • Quiescent Current: 30µA (typical)
  • Dropout Voltage: 200mV (typical)

Detailed Pin Configuration

XC6109C14ANR-G has the following pin configuration:

  1. VOUT (Output Voltage)
  2. GND (Ground)
  3. VIN (Input Voltage)
  4. CE (Chip Enable)

Functional Features

  • Voltage regulation: XC6109C14ANR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Power management: This IC efficiently manages power consumption, reducing energy waste.
  • Chip enable function: The CE pin allows for easy control of the device's operation.

Advantages and Disadvantages

Advantages

  • Compact size enables integration into space-constrained electronic devices.
  • High efficiency results in reduced power consumption and longer battery life.
  • Wide input and output voltage ranges provide flexibility in various applications.

Disadvantages

  • Limited maximum output current may not be suitable for high-power devices.
  • Dropout voltage may cause a slight decrease in efficiency under certain conditions.

Working Principles

XC6109C14ANR-G utilizes internal circuitry to regulate the output voltage based on the input voltage and load conditions. It employs feedback mechanisms to maintain a stable output voltage, compensating for variations in the input voltage.

Detailed Application Field Plans

XC6109C14ANR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6109C14ANR-G include: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6221B332MR-G - XC6223B332MR-G

These models provide comparable voltage regulation and power management capabilities, catering to different design requirements.

Word count: 346 words

Énumérez 10 questions et réponses courantes liées à l'application de XC6109C14ANR-G dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of XC6109C14ANR-G in technical solutions:

  1. Q: What is XC6109C14ANR-G? A: XC6109C14ANR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6109C14ANR-G? A: The operating voltage range of XC6109C14ANR-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6109C14ANR-G work? A: XC6109C14ANR-G continuously monitors the input voltage and provides a digital output signal when the voltage falls below or exceeds a certain threshold.

  4. Q: What is the output type of XC6109C14ANR-G? A: XC6109C14ANR-G has an open-drain output, which means it can be connected to other devices with a pull-up resistor to achieve different logic levels.

  5. Q: What is the typical quiescent current consumption of XC6109C14ANR-G? A: The typical quiescent current consumption of XC6109C14ANR-G is very low, usually around 1.0µA.

  6. Q: Can XC6109C14ANR-G be used for undervoltage and overvoltage detection? A: Yes, XC6109C14ANR-G can be configured to detect both undervoltage and overvoltage conditions by setting appropriate threshold voltages.

  7. Q: What is the accuracy of the voltage detection in XC6109C14ANR-G? A: The accuracy of voltage detection in XC6109C14ANR-G is typically ±2.0%.

  8. Q: Can XC6109C14ANR-G be used in automotive applications? A: Yes, XC6109C14ANR-G is suitable for automotive applications as it meets the required standards and has a wide operating temperature range.

  9. Q: Does XC6109C14ANR-G have any built-in protection features? A: Yes, XC6109C14ANR-G includes built-in overcurrent protection and thermal shutdown features to ensure safe operation.

  10. Q: What package does XC6109C14ANR-G come in? A: XC6109C14ANR-G is available in a compact SOT-23-5 package, which is widely used in various electronic devices.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.