Torex Semiconductor Ltd
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
XC6108N46DGR-G
Voir les détails DataSheets

XC6108N46DGR-G

Product Overview

Category

XC6108N46DGR-G belongs to the category of electronic components.

Use

It is commonly used in various electronic devices and circuits for voltage regulation purposes.

Characteristics

  • Voltage regulator
  • Small form factor
  • Low power consumption
  • High precision
  • Wide input voltage range

Package

XC6108N46DGR-G is available in a compact surface mount package.

Essence

The essence of XC6108N46DGR-G lies in its ability to regulate voltage efficiently and accurately, ensuring stable power supply to connected electronic components.

Packaging/Quantity

XC6108N46DGR-G is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.6V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6108N46DGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6108N46DGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected components.
  • Thermal shutdown: In case of excessive temperature, the device shuts down to prevent damage.
  • Low quiescent current: The low quiescent current minimizes power consumption when the load is light.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into various electronic devices.
  • Wide input voltage range makes it suitable for a wide range of applications.
  • High precision ensures accurate voltage regulation.
  • Low power consumption helps conserve energy.

Disadvantages

  • Limited output current may not be sufficient for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6108N46DGR-G operates on the principle of a linear voltage regulator. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

XC6108N46DGR-G finds applications in various electronic devices and circuits, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT (Internet of Things) devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6108N46DGR-G include: - XC6206P462MR-G - LM1117IMPX-4.6/NOPB - MCP1700T-4602E/TT

These alternatives can be considered based on specific requirements and availability.

(Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.)

Énumérez 10 questions et réponses courantes liées à l'application de XC6108N46DGR-G dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of XC6108N46DGR-G in technical solutions:

  1. Question: What is XC6108N46DGR-G?
    - Answer: XC6108N46DGR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6108N46DGR-G?
    - Answer: The operating voltage range of XC6108N46DGR-G is typically between 0.7V and 6.0V.

  3. Question: What is the output voltage of XC6108N46DGR-G?
    - Answer: XC6108N46DGR-G has a fixed output voltage of 4.6V.

  4. Question: How does XC6108N46DGR-G detect voltage levels?
    - Answer: XC6108N46DGR-G uses a built-in voltage reference and comparator to monitor the input voltage and provide an output signal when it falls below the specified threshold.

  5. Question: Can XC6108N46DGR-G be used in battery-powered applications?
    - Answer: Yes, XC6108N46DGR-G can be used in battery-powered applications as long as the operating voltage range is within the limits of the device.

  6. Question: What is the quiescent current consumption of XC6108N46DGR-G?
    - Answer: The quiescent current consumption of XC6108N46DGR-G is typically around 1.0µA, making it suitable for low-power applications.

  7. Question: Is XC6108N46DGR-G available in different package options?
    - Answer: Yes, XC6108N46DGR-G is available in various package options, including SOT-25 and USP-6B.

  8. Question: Can XC6108N46DGR-G be used for overvoltage protection?
    - Answer: No, XC6108N46DGR-G is specifically designed for undervoltage detection and does not provide overvoltage protection.

  9. Question: What is the temperature range of XC6108N46DGR-G?
    - Answer: The temperature range of XC6108N46DGR-G is typically between -40°C and +85°C.

  10. Question: Are there any application notes or reference designs available for XC6108N46DGR-G?
    - Answer: Yes, Torex Semiconductor provides application notes and reference designs on their website that can help with the implementation of XC6108N46DGR-G in different technical solutions.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.