Texas Instruments
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
TPS60210DGSR
Voir les détails DataSheets

TPS60210DGSR

Product Overview

Category

The TPS60210DGSR belongs to the category of voltage regulators.

Use

It is used to regulate voltage in electronic circuits, particularly in battery-powered applications.

Characteristics

  • Input Voltage Range: 0.9V to 5.5V
  • Output Voltage Range: 1.8V to 5.5V
  • Quiescent Current: 55µA
  • Package Type: VSSOP
  • Operating Temperature Range: -40°C to 125°C

Package

The TPS60210DGSR comes in a small VSSOP package, making it suitable for space-constrained designs.

Essence

The essence of TPS60210DGSR lies in its ability to efficiently regulate voltage while consuming minimal power, making it ideal for portable and battery-powered devices.

Packaging/Quantity

It is typically available in tape and reel packaging with a quantity of 2500 units per reel.

Specifications

  • Input Voltage Range: 0.9V to 5.5V
  • Output Voltage Range: 1.8V to 5.5V
  • Quiescent Current: 55µA
  • Switching Frequency: 1.2MHz
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: VSSOP

Detailed Pin Configuration

The TPS60210DGSR has the following pin configuration: 1. VIN (Input Voltage) 2. EN (Enable) 3. FB (Feedback) 4. GND (Ground) 5. SW (Switch Node) 6. VOUT (Output Voltage)

Functional Features

  • Low input voltage operation
  • High efficiency over a wide load range
  • Integrated soft start
  • Overcurrent protection
  • Thermal shutdown protection

Advantages and Disadvantages

Advantages

  • Wide input voltage range
  • Small package size
  • Low quiescent current
  • High efficiency

Disadvantages

  • Limited output current capability
  • Higher cost compared to traditional linear regulators

Working Principles

The TPS60210DGSR utilizes a step-up (boost) topology to regulate the output voltage. When enabled, it switches at a high frequency to store energy in an inductor and then deliver it to the output capacitor, providing a stable output voltage higher than the input voltage.

Detailed Application Field Plans

The TPS60210DGSR is well-suited for various battery-powered applications, including: - Portable medical devices - Wearable electronics - Handheld instruments - Battery-powered sensors

Detailed and Complete Alternative Models

Some alternative models to TPS60210DGSR include: - TPS61023DRCR - TPS61200DRCR - TPS63020DRCR - TPS62740DSCR

In conclusion, the TPS60210DGSR is a versatile voltage regulator with a wide input voltage range and efficient operation, making it an excellent choice for battery-powered applications requiring stable voltage regulation.

[Word Count: 426]

Énumérez 10 questions et réponses courantes liées à l'application de TPS60210DGSR dans les solutions techniques

  1. What is the TPS60210DGSR?

    • The TPS60210DGSR is a step-up DC-DC converter with an integrated boost switch, suitable for applications requiring a regulated output voltage from a single-cell alkaline, NiCd or NiMH battery, or from a 2-cell AA, AAA, C, or D type battery.

  2. What is the input voltage range of TPS60210DGSR?

    • The input voltage range of TPS60210DGSR is 0.7V to 5.5V.

  3. What is the typical output voltage range of TPS60210DGSR?

    • The typical output voltage range of TPS60210DGSR is 1.8V to 5.5V.

  4. What is the maximum output current of TPS60210DGSR?

    • The maximum output current of TPS60210DGSR is 50mA.

  5. What are the key features of TPS60210DGSR?

    • The key features of TPS60210DGSR include low input voltage operation, integrated boost switch, low quiescent current, and small solution size.

  6. What are the typical applications of TPS60210DGSR?

    • The typical applications of TPS60210DGSR include portable and battery-powered equipment, energy harvesting, and wireless sensor nodes.

  7. What is the efficiency of TPS60210DGSR?

    • The efficiency of TPS60210DGSR is typically around 80% to 90%, depending on the input and output voltage conditions.

  8. Does TPS60210DGSR have built-in overcurrent protection?

    • Yes, TPS60210DGSR has built-in overcurrent protection to safeguard the device and the load.

  9. What is the operating temperature range of TPS60210DGSR?

    • The operating temperature range of TPS60210DGSR is -40°C to 85°C.

  10. Is TPS60210DGSR available in a small package?

    • Yes, TPS60210DGSR is available in a small 8-pin VSSOP package, making it suitable for space-constrained applications.