Texas Instruments
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
TLC2264QDG4
Voir les détails DataSheets

TLC2264QDG4

Product Overview

Category

TLC2264QDG4 belongs to the category of operational amplifiers (op-amps).

Use

This product is commonly used in various electronic circuits where amplification and signal conditioning are required.

Characteristics

  • Low power consumption
  • Rail-to-rail input and output capability
  • Wide supply voltage range
  • High slew rate
  • Low input offset voltage
  • Low noise

Package

TLC2264QDG4 is available in a small outline package (SOIC) with 14 pins.

Essence

The essence of TLC2264QDG4 lies in its ability to provide high-performance amplification and signal conditioning in a compact package.

Packaging/Quantity

This product is typically packaged in reels or tubes, with each reel/tube containing a specific quantity of TLC2264QDG4 op-amps.

Specifications

  • Supply Voltage Range: ±2.5V to ±16V
  • Input Offset Voltage: 1mV (maximum)
  • Slew Rate: 3.6V/µs
  • Gain Bandwidth Product: 2.2MHz
  • Input Bias Current: 0.5pA (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The TLC2264QDG4 has a total of 14 pins, as follows:

  1. OUT1: Output pin for amplifier 1
  2. IN-1: Inverting input pin for amplifier 1
  3. IN+1: Non-inverting input pin for amplifier 1
  4. VCC+: Positive power supply pin
  5. VCC-: Negative power supply pin
  6. IN+2: Non-inverting input pin for amplifier 2
  7. IN-2: Inverting input pin for amplifier 2
  8. OUT2: Output pin for amplifier 2
  9. NC: No connection pin
  10. IN-3: Inverting input pin for amplifier 3
  11. IN+3: Non-inverting input pin for amplifier 3
  12. OUT3: Output pin for amplifier 3
  13. IN+4: Non-inverting input pin for amplifier 4
  14. IN-4: Inverting input pin for amplifier 4

Functional Features

  • Rail-to-rail input and output capability allows for maximum utilization of the supply voltage range.
  • Low power consumption makes it suitable for battery-powered applications.
  • High slew rate enables fast signal amplification and response.
  • Low input offset voltage ensures accurate signal conditioning.
  • Wide supply voltage range provides flexibility in various circuit designs.
  • Low noise performance enhances signal integrity.

Advantages and Disadvantages

Advantages

  • Versatile and widely used in various electronic circuits.
  • Compact package size saves board space.
  • High-performance characteristics ensure reliable signal amplification and conditioning.
  • Suitable for low-power and battery-powered applications.

Disadvantages

  • Limited number of amplifiers (4) compared to some other op-amp models.
  • May not be suitable for high-frequency applications due to limited gain bandwidth product.

Working Principles

TLC2264QDG4 operates based on the principles of operational amplifiers. It amplifies the input signal while maintaining linearity, accuracy, and stability. The rail-to-rail input and output capability allow the op-amp to handle signals that span the entire supply voltage range. By adjusting the feedback network, the gain and behavior of the op-amp can be tailored to specific application requirements.

Detailed Application Field Plans

TLC2264QDG4 finds applications in various fields, including but not limited to: - Audio amplification and signal conditioning - Sensor signal conditioning - Active filters - Data acquisition systems - Instrumentation amplifiers - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models to TLC2264QDG4 include: - LM324 - TL074 - AD822 - MCP6004 - OPA2340

These alternatives offer similar functionality and characteristics, providing options for different design requirements.

Word count: 511 words

Énumérez 10 questions et réponses courantes liées à l'application de TLC2264QDG4 dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of TLC2264QDG4 in technical solutions:

  1. Question: What is the TLC2264QDG4?
    Answer: The TLC2264QDG4 is a quad operational amplifier (op-amp) with low power consumption and rail-to-rail output capability.

  2. Question: What is the supply voltage range for the TLC2264QDG4?
    Answer: The supply voltage range for the TLC2264QDG4 is typically between 2.7V and 16V.

  3. Question: What is the input offset voltage of the TLC2264QDG4?
    Answer: The input offset voltage of the TLC2264QDG4 is typically 1mV.

  4. Question: Can the TLC2264QDG4 operate at high temperatures?
    Answer: Yes, the TLC2264QDG4 can operate at temperatures up to 125°C.

  5. Question: What is the typical gain bandwidth product of the TLC2264QDG4?
    Answer: The typical gain bandwidth product of the TLC2264QDG4 is 1MHz.

  6. Question: Is the TLC2264QDG4 suitable for battery-powered applications?
    Answer: Yes, the TLC2264QDG4 has low power consumption, making it suitable for battery-powered applications.

  7. Question: Can the TLC2264QDG4 be used in single-supply applications?
    Answer: Yes, the TLC2264QDG4 can be used in both single-supply and split-supply applications.

  8. Question: What is the input common-mode voltage range of the TLC2264QDG4?
    Answer: The input common-mode voltage range of the TLC2264QDG4 includes the negative supply rail and extends to within 1.5V of the positive supply rail.

  9. Question: Does the TLC2264QDG4 have built-in protection features?
    Answer: Yes, the TLC2264QDG4 has built-in electrostatic discharge (ESD) protection and short-circuit protection.

  10. Question: What are some common applications for the TLC2264QDG4?
    Answer: The TLC2264QDG4 is commonly used in audio amplifiers, sensor interfaces, signal conditioning circuits, and low-power instrumentation amplifiers.

Please note that these answers are general and may vary depending on specific application requirements and conditions.