Texas Instruments
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
SN74AVCA406DGGRG4
Voir les détails DataSheets

SN74AVCA406DGGRG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Signal Switching and Routing
  • Characteristics: High-speed, Low-power, Bidirectional Voltage Level Translator
  • Package: 48-pin TSSOP (Thin Shrink Small Outline Package)
  • Essence: Voltage Level Translation between different logic families
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.2V to 3.6V
  • Logic Voltage Range: 1.2V to 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Input Capacitance: 3pF
  • Output Capacitance: 5pF
  • Propagation Delay: 2.5ns (typical)
  • Maximum Data Rate: 400Mbps

Detailed Pin Configuration

The SN74AVCA406DGGRG4 has a total of 48 pins. The pin configuration is as follows:

  1. OE (Output Enable) 1
  2. A1 (Data Input/Output) 1
  3. B1 (Data Input/Output) 1
  4. VCCA (Voltage Supply for Side A)
  5. GND (Ground)
  6. B2 (Data Input/Output) 2
  7. A2 (Data Input/Output) 2
  8. OE (Output Enable) 2
  9. VCCB (Voltage Supply for Side B)
  10. A3 (Data Input/Output) 3
  11. B3 (Data Input/Output) 3
  12. OE (Output Enable) 3
  13. VCCA (Voltage Supply for Side A)
  14. GND (Ground)
  15. B4 (Data Input/Output) 4
  16. A4 (Data Input/Output) 4
  17. OE (Output Enable) 4
  18. VCCB (Voltage Supply for Side B)
  19. A5 (Data Input/Output) 5
  20. B5 (Data Input/Output) 5
  21. OE (Output Enable) 5
  22. VCCA (Voltage Supply for Side A)
  23. GND (Ground)
  24. B6 (Data Input/Output) 6
  25. A6 (Data Input/Output) 6
  26. OE (Output Enable) 6
  27. VCCB (Voltage Supply for Side B)
  28. A7 (Data Input/Output) 7
  29. B7 (Data Input/Output) 7
  30. OE (Output Enable) 7
  31. VCCA (Voltage Supply for Side A)
  32. GND (Ground)
  33. B8 (Data Input/Output) 8
  34. A8 (Data Input/Output) 8
  35. OE (Output Enable) 8
  36. VCCB (Voltage Supply for Side B)
  37. A9 (Data Input/Output) 9
  38. B9 (Data Input/Output) 9
  39. OE (Output Enable) 9
  40. VCCA (Voltage Supply for Side A)
  41. GND (Ground)
  42. B10 (Data Input/Output) 10
  43. A10 (Data Input/Output) 10
  44. OE (Output Enable) 10
  45. VCCB (Voltage Supply for Side B)
  46. A11 (Data Input/Output) 11
  47. B11 (Data Input/Output) 11
  48. OE (Output Enable) 11

Functional Features

  • Bidirectional voltage level translation between different logic families
  • High-speed operation with low propagation delay
  • Low-power consumption
  • Output enable control for each channel
  • Wide supply voltage range for compatibility

Advantages and Disadvantages

Advantages: - Enables seamless communication between devices operating at different voltage levels - Fast data transmission with low delay - Low power consumption - Easy integration into existing circuit designs

Disadvantages: - Limited to voltage level translation and does not provide additional functionality - Requires careful consideration of input/output voltage levels to avoid signal distortion or damage

Working Principles

The SN74AVCA406DGGRG4 is a bidirectional voltage level translator that allows seamless communication between devices operating at different voltage levels. It uses a combination of MOSFETs and level-shifting circuits to convert signals from one logic family to another.

When an input signal is received, the level translator detects the voltage level and converts it to the corresponding voltage level on the output side. The direction of translation is determined by the OE (Output Enable) pin, which controls the flow of data between the input and output channels.

The level translator

Énumérez 10 questions et réponses courantes liées à l'application de SN74AVCA406DGGRG4 dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of SN74AVCA406DGGRG4 in technical solutions:

  1. Q: What is SN74AVCA406DGGRG4? A: SN74AVCA406DGGRG4 is a specific integrated circuit (IC) manufactured by Texas Instruments, designed for voltage level translation and signal conditioning.

  2. Q: What is the purpose of SN74AVCA406DGGRG4? A: SN74AVCA406DGGRG4 is used to convert signals between different voltage levels, making it suitable for interfacing components with incompatible voltage levels.

  3. Q: What voltage levels can SN74AVCA406DGGRG4 handle? A: SN74AVCA406DGGRG4 supports voltage level translation between 1.2V and 3.6V, making it compatible with various logic families such as CMOS, TTL, and LVCMOS.

  4. Q: How many channels does SN74AVCA406DGGRG4 have? A: SN74AVCA406DGGRG4 has six bidirectional channels, allowing for simultaneous translation of multiple signals.

  5. Q: Can SN74AVCA406DGGRG4 handle high-speed signals? A: Yes, SN74AVCA406DGGRG4 is designed to support high-speed data rates up to 100 Mbps, making it suitable for applications requiring fast signal transmission.

  6. Q: Is SN74AVCA406DGGRG4 compatible with both push-pull and open-drain outputs? A: Yes, SN74AVCA406DGGRG4 supports both push-pull and open-drain output configurations, providing flexibility in different system designs.

  7. Q: Does SN74AVCA406DGGRG4 require external power supply decoupling capacitors? A: Yes, it is recommended to use external decoupling capacitors near the VCCA and VCCB pins of SN74AVCA406DGGRG4 to ensure stable operation.

  8. Q: Can SN74AVCA406DGGRG4 be used in automotive applications? A: Yes, SN74AVCA406DGGRG4 is qualified for automotive applications and meets the necessary industry standards.

  9. Q: What is the operating temperature range of SN74AVCA406DGGRG4? A: SN74AVCA406DGGRG4 can operate within a temperature range of -40°C to +125°C, making it suitable for various environments.

  10. Q: Are there any application notes or reference designs available for SN74AVCA406DGGRG4? A: Yes, Texas Instruments provides application notes and reference designs that can help users understand and implement SN74AVCA406DGGRG4 effectively in their technical solutions.

Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It is always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.