Texas Instruments
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
SN74AC245NSR
Voir les détails DataSheets

SN74AC245NSR

Product Overview

Category

SN74AC245NSR belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used for signal level shifting and voltage translation in various electronic devices.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with TTL inputs
  • Schmitt-trigger input
  • 3-state outputs

Package

SN74AC245NSR is available in a small-outline package (SOIC) with 20 pins.

Essence

The essence of SN74AC245NSR lies in its ability to efficiently shift and translate signals between different voltage levels, ensuring seamless communication between different components of an electronic system.

Packaging/Quantity

SN74AC245NSR is typically packaged in reels containing 2500 units.

Specifications

  • Supply Voltage: 2V to 6V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Propagation Delay: 5.8 ns
  • Maximum Operating Frequency: 125 MHz

Detailed Pin Configuration

  1. DIR (Direction Control)
  2. OE (Output Enable)
  3. A1 (Input/Output)
  4. B1 (Input/Output)
  5. A2 (Input/Output)
  6. B2 (Input/Output)
  7. A3 (Input/Output)
  8. B3 (Input/Output)
  9. A4 (Input/Output)
  10. B4 (Input/Output)
  11. GND (Ground)
  12. B5 (Input/Output)
  13. A5 (Input/Output)
  14. B6 (Input/Output)
  15. A6 (Input/Output)
  16. B7 (Input/Output)
  17. A7 (Input/Output)
  18. B8 (Input/Output)
  19. A8 (Input/Output)
  20. VCC (Supply Voltage)

Functional Features

  • Bidirectional voltage translation
  • Non-inverting outputs
  • 3-state outputs for bus-oriented applications
  • Direction control for data flow management
  • Output enable/disable for controlling output state

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient signal processing.
  • Low power consumption helps in reducing energy requirements.
  • Wide operating voltage range ensures compatibility with various systems.
  • Compatibility with TTL inputs simplifies integration with existing designs.
  • Schmitt-trigger input provides noise immunity.

Disadvantages

  • Limited number of input/output channels (8-bit).
  • Not suitable for high-voltage applications.

Working Principles

SN74AC245NSR operates by receiving input signals on its bidirectional data lines (A1-A8 and B1-B8) and translating them to the desired output voltage level based on the supply voltage (VCC). The direction control pin (DIR) determines the direction of data flow, while the output enable pin (OE) enables or disables the outputs. The IC utilizes internal circuitry to ensure fast and accurate voltage translation.

Detailed Application Field Plans

SN74AC245NSR finds extensive application in various electronic systems, including: - Microcontrollers and microprocessors - Communication devices - Data acquisition systems - Industrial automation equipment - Automotive electronics - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to SN74AC245NSR are: - SN74LVC245A - SN74HCT245 - SN74LVCH245A - SN74ACT245

These alternatives can be considered based on specific design requirements and compatibility with existing systems.

Word count: 524 words

Énumérez 10 questions et réponses courantes liées à l'application de SN74AC245NSR dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of SN74AC245NSR:

  1. Q: What is SN74AC245NSR? A: SN74AC245NSR is a type of integrated circuit (IC) commonly used as a bidirectional transceiver for transferring data between different voltage levels.

  2. Q: What is the operating voltage range of SN74AC245NSR? A: The operating voltage range of SN74AC245NSR is typically between 2V and 6V.

  3. Q: Can SN74AC245NSR be used for level shifting between different logic families? A: Yes, SN74AC245NSR is suitable for level shifting between different logic families, such as TTL and CMOS.

  4. Q: How many data lines can SN74AC245NSR handle? A: SN74AC245NSR has 8 bidirectional data lines, allowing it to handle up to 8 bits of data simultaneously.

  5. Q: What is the maximum data transfer rate supported by SN74AC245NSR? A: SN74AC245NSR supports high-speed data transfer rates of up to 100 MHz.

  6. Q: Can SN74AC245NSR be used in both parallel and serial communication systems? A: Yes, SN74AC245NSR can be used in both parallel and serial communication systems, depending on the application requirements.

  7. Q: Does SN74AC245NSR have any built-in protection features? A: Yes, SN74AC245NSR includes built-in ESD protection diodes to safeguard against electrostatic discharge.

  8. Q: What is the typical power consumption of SN74AC245NSR? A: The typical power consumption of SN74AC245NSR is relatively low, making it suitable for power-sensitive applications.

  9. Q: Can SN74AC245NSR be used in both 3.3V and 5V systems? A: Yes, SN74AC245NSR is compatible with both 3.3V and 5V systems, allowing for versatile application possibilities.

  10. Q: Are there any specific layout considerations when using SN74AC245NSR? A: Yes, it is recommended to follow the manufacturer's guidelines for proper decoupling, signal integrity, and thermal management during PCB layout to ensure optimal performance.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always advisable to refer to the datasheet and consult with technical experts for accurate information.