Texas Instruments
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
SN74ABT8652DLRG4
Voir les détails DataSheets

SN74ABT8652DLRG4

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Logic Level Translator
  • Characteristics: High-speed, low-power consumption
  • Package: 56-pin TSSOP (Thin Shrink Small Outline Package)
  • Essence: Translates logic levels between different voltage domains
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.65V to 3.6V
  • Logic Voltage Levels: 1.8V, 2.5V, 3.3V
  • Maximum Data Rate: 100 Mbps
  • Number of Channels: 16
  • Input/Output Compatibility: TTL, CMOS

Pin Configuration

The SN74ABT8652DLRG4 has a total of 56 pins. The pin configuration is as follows:

  1. VCCA - Power supply for side A
  2. GND - Ground
  3. A1 - Channel A input 1
  4. A2 - Channel A input 2
  5. A3 - Channel A input 3
  6. A4 - Channel A input 4
  7. A5 - Channel A input 5
  8. A6 - Channel A input 6
  9. A7 - Channel A input 7
  10. A8 - Channel A input 8
  11. A9 - Channel A input 9
  12. A10 - Channel A input 10
  13. A11 - Channel A input 11
  14. A12 - Channel A input 12
  15. A13 - Channel A input 13
  16. A14 - Channel A input 14
  17. A15 - Channel A input 15
  18. A16 - Channel A input 16
  19. VCCB - Power supply for side B
  20. B1 - Channel B input 1
  21. B2 - Channel B input 2
  22. B3 - Channel B input 3
  23. B4 - Channel B input 4
  24. B5 - Channel B input 5
  25. B6 - Channel B input 6
  26. B7 - Channel B input 7
  27. B8 - Channel B input 8
  28. B9 - Channel B input 9
  29. B10 - Channel B input 10
  30. B11 - Channel B input 11
  31. B12 - Channel B input 12
  32. B13 - Channel B input 13
  33. B14 - Channel B input 14
  34. B15 - Channel B input 15
  35. B16 - Channel B input 16
  36. OEAB - Output enable for channels A and B
  37. OEA1 - Channel A output 1
  38. OEA2 - Channel A output 2
  39. OEA3 - Channel A output 3
  40. OEA4 - Channel A output 4
  41. OEA5 - Channel A output 5
  42. OEA6 - Channel A output 6
  43. OEA7 - Channel A output 7
  44. OEA8 - Channel A output 8
  45. OEA9 - Channel A output 9
  46. OEA10 - Channel A output 10
  47. OEA11 - Channel A output 11
  48. OEA12 - Channel A output 12
  49. OEA13 - Channel A output 13
  50. OEA14 - Channel A output 14
  51. OEA15 - Channel A output 15
  52. OEA16 - Channel A output 16
  53. OEB1 - Channel B output 1
  54. OEB2 - Channel B output 2
  55. OEB3 - Channel B output 3
  56. OEB4 - Channel B output 4

Functional Features

  • Logic level translation between different voltage domains
  • Bidirectional data flow
  • High-speed operation
  • Low-power consumption
  • ESD (Electrostatic Discharge) protection on all inputs and outputs

Advantages and Disadvantages

Advantages: - Allows interfacing between devices operating at different logic levels - Supports high-speed data transmission - Provides ESD protection for enhanced reliability - Low power consumption

Disadvantages: - Limited to a maximum data rate of 100 Mbps - Requires careful consideration of voltage compatibility between input and output channels

Working Principles

The SN74ABT8652DLRG4 is a logic level translator that enables communication between devices operating at different voltage levels. It utilizes a combination of level shifters and voltage clamping circuits to ensure proper signal translation.

When an input signal is received, the device detects the logic

Énumérez 10 questions et réponses courantes liées à l'application de SN74ABT8652DLRG4 dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of SN74ABT8652DLRG4 in technical solutions:

  1. Q: What is the SN74ABT8652DLRG4? A: The SN74ABT8652DLRG4 is a high-speed octal bus transceiver with configurable voltage translation and 3-state outputs.

  2. Q: What is the voltage range supported by SN74ABT8652DLRG4? A: The SN74ABT8652DLRG4 supports voltage translation between 1.2V and 3.6V.

  3. Q: How many bits can the SN74ABT8652DLRG4 handle? A: The SN74ABT8652DLRG4 is an octal transceiver, meaning it can handle 8 bits of data.

  4. Q: Can I use the SN74ABT8652DLRG4 for bidirectional communication? A: Yes, the SN74ABT8652DLRG4 supports bidirectional data flow.

  5. Q: What is the maximum data transfer rate supported by SN74ABT8652DLRG4? A: The SN74ABT8652DLRG4 supports high-speed operation up to 200 MHz.

  6. Q: Does the SN74ABT8652DLRG4 have built-in ESD protection? A: Yes, the SN74ABT8652DLRG4 has built-in ESD protection, making it more robust against electrostatic discharge.

  7. Q: Can I use the SN74ABT8652DLRG4 in automotive applications? A: Yes, the SN74ABT8652DLRG4 is qualified for automotive applications and meets the necessary standards.

  8. Q: Does the SN74ABT8652DLRG4 have configurable voltage levels? A: Yes, the SN74ABT8652DLRG4 supports configurable voltage translation levels through its VCCA and VCCB pins.

  9. Q: What is the power supply range for SN74ABT8652DLRG4? A: The SN74ABT8652DLRG4 operates with a power supply range of 1.65V to 3.6V.

  10. Q: Can I use the SN74ABT8652DLRG4 in industrial applications? A: Yes, the SN74ABT8652DLRG4 is suitable for industrial applications due to its wide operating temperature range and robustness.

Please note that these answers are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and consult with technical experts for detailed information.