Voir les spécifications pour les détails du produit.
LM4050QBIM3X8.2/NOPB
Product Overview
Category
The LM4050QBIM3X8.2/NOPB belongs to the category of precision voltage references.
Use
It is commonly used as a stable reference voltage source in various electronic circuits and systems.
Characteristics
- High precision
- Low temperature coefficient
- Small package size
- Low power consumption
Package
The LM4050QBIM3X8.2/NOPB is typically available in a SOT-23 package.
Essence
This voltage reference provides a stable and accurate voltage output for use in analog and digital circuits.
Packaging/Quantity
It is usually supplied in tape and reel packaging with a quantity of 3000 units per reel.
Specifications
- Output Voltage: 8.2V
- Initial Accuracy: ±0.5%
- Temperature Coefficient: 20ppm/°C
- Operating Temperature Range: -40°C to 85°C
- Supply Voltage Range: 4V to 10V
- Quiescent Current: 60µA
Detailed Pin Configuration
The LM4050QBIM3X8.2/NOPB has three pins: 1. VOUT (Output) 2. GND (Ground) 3. VIN (Input)
Functional Features
- Precision voltage reference
- Low dropout voltage
- Thermal shutdown protection
- Short-circuit current limit
Advantages and Disadvantages
Advantages
- High precision and accuracy
- Low temperature coefficient
- Small form factor
- Low power consumption
Disadvantages
- Limited output voltage options
- Sensitive to input voltage fluctuations
Working Principles
The LM4050QBIM3X8.2/NOPB operates based on the bandgap reference principle, where the output voltage is derived from the base-emitter voltage of a bipolar junction transistor.
Detailed Application Field Plans
Analog Circuits
Utilized as a stable voltage reference for analog-to-digital converters, operational amplifiers, and sensor interfaces.
Power Management Systems
Integrated into voltage regulators, battery management systems, and power supply modules for precise voltage control.
Test and Measurement Equipment
Incorporated as a reference source in multimeters, oscilloscopes, and signal generators for accurate measurements.
Detailed and Complete Alternative Models
- LM4040AIM3-5.0/NOPB
- LM4120IM5X-3.0/NOPB
- LT1461CCS8-5/NOPB
- MAX6126AASA25+
In conclusion, the LM4050QBIM3X8.2/NOPB is a precision voltage reference offering high accuracy and stability, making it suitable for a wide range of applications in electronic circuits and systems.
Word Count: 411
Énumérez 10 questions et réponses courantes liées à l'application de LM4050QBIM3X8.2/NOPB dans les solutions techniques
What is the LM4050QBIM3X8.2/NOPB?
The LM4050QBIM3X8.2/NOPB is a precision voltage reference diode that provides a stable 8.2V output.What are the typical applications of LM4050QBIM3X8.2/NOPB?
It is commonly used in precision voltage reference applications, such as in instrumentation, industrial control systems, and data acquisition systems.What is the operating temperature range of LM4050QBIM3X8.2/NOPB?
The LM4050QBIM3X8.2/NOPB has an operating temperature range of -40°C to 125°C.What is the voltage accuracy of LM4050QBIM3X8.2/NOPB?
The LM4050QBIM3X8.2/NOPB has a voltage accuracy of ±0.5%.Can LM4050QBIM3X8.2/NOPB be used in battery-powered applications?
Yes, it can be used in battery-powered applications due to its low power consumption.What is the typical output current of LM4050QBIM3X8.2/NOPB?
The typical output current of LM4050QBIM3X8.2/NOPB is 15mA.Is LM4050QBIM3X8.2/NOPB suitable for space-constrained designs?
Yes, it is available in a small SOT-23 package, making it suitable for space-constrained designs.Can LM4050QBIM3X8.2/NOPB be used in automotive electronics?
Yes, it is suitable for automotive electronics applications due to its wide temperature range and stability.What are the key features of LM4050QBIM3X8.2/NOPB?
Key features include low dropout voltage, low quiescent current, and excellent long-term stability.Are there any recommended external components for using LM4050QBIM3X8.2/NOPB?
A bypass capacitor is recommended for improved noise performance and stability when using LM4050QBIM3X8.2/NOPB.