L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
74ACT16374DLRG4

Encyclopedia Entry: 74ACT16374DLRG4

Product Overview

Category

The 74ACT16374DLRG4 belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in digital electronics for data storage and transfer applications.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Schmitt-trigger inputs for noise immunity
  • 16-bit D-type flip-flop with 3-state outputs

Package

The 74ACT16374DLRG4 is available in a dual 48-pin ceramic leadless chip carrier (DLCC) package.

Essence

The essence of this product lies in its ability to store and transfer digital data efficiently and reliably.

Packaging/Quantity

The 74ACT16374DLRG4 is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Supply Voltage Range: 2.0V to 6.0V
  • Input Voltage Range: -0.5V to VCC + 0.5V
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Maximum Clock Frequency: 100MHz

Detailed Pin Configuration

The 74ACT16374DLRG4 has a total of 48 pins, which are assigned as follows:

  1. Pin 1: Output Q0
  2. Pin 2: Output Q1
  3. Pin 3: Output Q2
  4. Pin 4: Output Q3
  5. Pin 5: Output Q4
  6. Pin 6: Output Q5
  7. Pin 7: Output Q6
  8. Pin 8: Output Q7
  9. Pin 9: Output Q8
  10. Pin 10: Output Q9
  11. Pin 11: Output Q10
  12. Pin 12: Output Q11
  13. Pin 13: Output Q12
  14. Pin 14: Output Q13
  15. Pin 15: Output Q14
  16. Pin 16: Output Q15
  17. Pin 17: GND (Ground)
  18. Pin 18: Clock Input (CP)
  19. Pin 19: Data Input D0
  20. Pin 20: Data Input D1
  21. Pin 21: Data Input D2
  22. Pin 22: Data Input D3
  23. Pin 23: Data Input D4
  24. Pin 24: Data Input D5
  25. Pin 25: Data Input D6
  26. Pin 26: Data Input D7
  27. Pin 27: Data Input D8
  28. Pin 28: Data Input D9
  29. Pin 29: Data Input D10
  30. Pin 30: Data Input D11
  31. Pin 31: Data Input D12
  32. Pin 32: Data Input D13
  33. Pin 33: Data Input D14
  34. Pin 34: Data Input D15
  35. Pin 35: Output Enable (OE)
  36. Pin 36: Master Reset (MR)
  37. Pin 37: Clock Enable (CE)
  38. Pin 38: Clock Disable (CD)
  39. Pin 39: Clock Output (CO)
  40. Pin 40: VCC (Supply Voltage)

Functional Features

  • 16-bit parallel-in/parallel-out data storage
  • 3-state outputs for bus-oriented applications
  • Synchronous operation with common clock input
  • Asynchronous master reset for clearing the flip-flop contents
  • Clock enable and disable inputs for controlling the clock signal
  • Clock output for cascading multiple devices

Advantages and Disadvantages

Advantages

  • High-speed operation allows for efficient data transfer.
  • Low power consumption helps in reducing overall energy usage.
  • Wide operating voltage range provides flexibility in various applications.
  • Schmitt-trigger inputs ensure reliable operation even in noisy environments.

Disadvantages

  • Limited number of outputs may restrict certain complex applications.
  • The DLCC package may not be suitable for all circuit board designs.

Working Principles

The 74ACT16374DLRG4 is a 16-bit D-type flip-flop with 3-state outputs. It stores digital data on its inputs (D0-D15) based on the rising edge of the clock input (CP). The stored data can then be accessed from the outputs (Q0-Q15) when the output enable (OE) signal is active. The master reset (MR) input asynchronously clears the flip-flop contents, while the clock enable (CE) and clock disable (CD) inputs control the clock signal. The clock output (CO) allows for cascading multiple devices

Énumérez 10 questions et réponses courantes liées à l'application de 74ACT16374DLRG4 dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of 74ACT16374DLRG4 in technical solutions:

  1. Q: What is the 74ACT16374DLRG4? A: The 74ACT16374DLRG4 is a 16-bit D-type flip-flop with 3-state outputs, commonly used in digital circuits.

  2. Q: What is the purpose of a D-type flip-flop? A: A D-type flip-flop stores and transfers data based on a clock signal, making it useful for sequential logic applications.

  3. Q: How many bits can the 74ACT16374DLRG4 handle? A: The 74ACT16374DLRG4 is a 16-bit flip-flop, meaning it can handle 16 individual bits of data.

  4. Q: What does "3-state outputs" mean? A: 3-state outputs allow the flip-flop to be in one of three states: high, low, or high-impedance (disconnected).

  5. Q: Can I use the 74ACT16374DLRG4 in both synchronous and asynchronous applications? A: Yes, the 74ACT16374DLRG4 can be used in both synchronous and asynchronous applications, depending on your requirements.

  6. Q: What is the maximum clock frequency supported by the 74ACT16374DLRG4? A: The maximum clock frequency supported by the 74ACT16374DLRG4 is typically specified in the datasheet and depends on various factors such as voltage and temperature.

  7. Q: Can I cascade multiple 74ACT16374DLRG4 flip-flops together? A: Yes, you can cascade multiple 74ACT16374DLRG4 flip-flops together to increase the number of bits you can handle.

  8. Q: What is the power supply voltage range for the 74ACT16374DLRG4? A: The power supply voltage range for the 74ACT16374DLRG4 is typically specified in the datasheet and can vary, but it is commonly around 2V to 6V.

  9. Q: Can I use the 74ACT16374DLRG4 in both CMOS and TTL logic systems? A: Yes, the 74ACT16374DLRG4 is compatible with both CMOS and TTL logic systems, making it versatile for various applications.

  10. Q: Are there any specific considerations for PCB layout when using the 74ACT16374DLRG4? A: Yes, it is important to follow the recommended PCB layout guidelines provided in the datasheet to ensure proper performance and minimize noise or signal integrity issues.

Please note that these answers are general and may vary depending on the specific application and requirements. Always refer to the datasheet and consult with an expert for accurate information.