Voir les spécifications pour les détails du produit.
STM1001SWX6F
Product Overview
- Category: Integrated Circuit (IC)
- Use: Power Management
- Characteristics: High efficiency, compact size, low power consumption
- Package: Surface Mount Technology (SMT)
- Essence: Voltage Regulator
- Packaging/Quantity: Tape and Reel, 3000 units per reel
Specifications
- Input Voltage Range: 2.7V to 5.5V
- Output Voltage Range: 0.8V to 3.6V
- Maximum Output Current: 1A
- Dropout Voltage: 200mV at 1A
- Quiescent Current: 75µA
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The STM1001SWX6F has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- FB: Feedback pin
- VOUT: Output voltage pin
Functional Features
- Low dropout voltage ensures efficient power conversion.
- Wide input voltage range allows for versatile applications.
- Enable pin provides control over the regulator's operation.
- Feedback pin enables precise output voltage regulation.
- Thermal shutdown and current limit protection features ensure safe operation.
Advantages
- High efficiency results in minimal power loss.
- Compact size allows for space-saving designs.
- Low power consumption extends battery life.
- Wide input voltage range accommodates various power sources.
- Thermal shutdown and current limit protection enhance reliability.
Disadvantages
- Limited maximum output current may not be suitable for high-power applications.
- Dropout voltage of 200mV may affect performance in low voltage scenarios.
Working Principles
The STM1001SWX6F is a voltage regulator that converts an input voltage within the range of 2.7V to 5.5V into a regulated output voltage between 0.8V and 3.6V. It achieves this by utilizing an internal control circuit that adjusts the duty cycle of an integrated switch, ensuring a stable output voltage despite variations in input voltage and load conditions.
Detailed Application Field Plans
The STM1001SWX6F is commonly used in various applications, including:
- Battery-powered devices: Provides efficient power management for portable electronics such as smartphones, tablets, and wearables.
- IoT devices: Enables reliable voltage regulation in Internet of Things (IoT) devices, ensuring stable operation and extended battery life.
- Industrial equipment: Suitable for powering sensors, actuators, and control systems in industrial automation applications.
- Automotive electronics: Used in automotive systems for voltage regulation, contributing to the overall reliability and performance of the vehicle's electrical components.
Detailed and Complete Alternative Models
- LM1117-3.3: A popular alternative with similar specifications and package type.
- TPS79633: Offers higher maximum output current and lower dropout voltage.
- LT1763: Provides adjustable output voltage and lower quiescent current.
(Note: This list is not exhaustive and other alternatives may exist.)
Word count: 369 words
Énumérez 10 questions et réponses courantes liées à l'application de STM1001SWX6F dans les solutions techniques
Sure! Here are 10 common questions and answers related to the application of STM1001SWX6F in technical solutions:
Q1: What is the STM1001SWX6F? A1: The STM1001SWX6F is a voltage supervisor and reset IC manufactured by STMicroelectronics.
Q2: What is the purpose of the STM1001SWX6F? A2: The STM1001SWX6F is designed to monitor the power supply voltage and generate a reset signal when the voltage falls below a certain threshold.
Q3: What are the typical applications of the STM1001SWX6F? A3: The STM1001SWX6F is commonly used in microcontroller-based systems, embedded systems, industrial automation, and other applications where reliable power supply monitoring is required.
Q4: What is the operating voltage range of the STM1001SWX6F? A4: The STM1001SWX6F operates within a voltage range of 1.8V to 5.5V.
Q5: How does the STM1001SWX6F detect a low voltage condition? A5: The STM1001SWX6F compares the monitored voltage with a fixed threshold voltage. If the monitored voltage falls below this threshold, it triggers a reset signal.
Q6: Can the threshold voltage be adjusted in the STM1001SWX6F? A6: No, the threshold voltage in the STM1001SWX6F is fixed and cannot be adjusted.
Q7: Does the STM1001SWX6F have any additional features? A7: Yes, the STM1001SWX6F includes a watchdog timer and a manual reset input for system control.
Q8: What is the watchdog timer in the STM1001SWX6F used for? A8: The watchdog timer is used to monitor the system's operation. If the system fails to reset the watchdog timer within a specified time, it generates a reset signal.
Q9: Can the STM1001SWX6F operate in harsh environments? A9: Yes, the STM1001SWX6F is designed to operate in a wide temperature range (-40°C to +125°C) and is suitable for use in harsh industrial environments.
Q10: Is the STM1001SWX6F available in different package options? A10: Yes, the STM1001SWX6F is available in various package options, including SOT-23, SO-8, and TSSOP-8, providing flexibility for different PCB layouts and applications.
Please note that these answers are general and may vary depending on the specific requirements and datasheet of the STM1001SWX6F.