STMicroelectronics
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
ST72C254G2M6
Voir les détails DataSheets

ST72C254G2M6

Product Overview

Category

The ST72C254G2M6 belongs to the category of microcontrollers.

Use

This microcontroller is commonly used in various electronic devices and systems for controlling and processing data.

Characteristics

  • High-performance 8-bit microcontroller
  • Low power consumption
  • Integrated memory and peripherals
  • Wide operating voltage range
  • Enhanced security features

Package

The ST72C254G2M6 is available in a compact and durable package, suitable for surface mount technology (SMT) applications.

Essence

The essence of the ST72C254G2M6 lies in its ability to provide efficient control and processing capabilities within a small form factor.

Packaging/Quantity

The microcontroller is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Architecture: 8-bit
  • CPU Frequency: Up to 16 MHz
  • Program Memory Size: 32 KB Flash
  • Data Memory Size: 1.5 KB RAM
  • Operating Voltage Range: 2.7V to 5.5V
  • Number of I/O Pins: 20
  • Communication Interfaces: UART, SPI, I2C
  • Timers/Counters: 3
  • Analog-to-Digital Converter (ADC): 8 channels, 10-bit resolution
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ST72C254G2M6 has a total of 20 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. PA0 - General-purpose I/O pin
  3. PA1 - General-purpose I/O pin
  4. PA2 - General-purpose I/O pin
  5. PA3 - General-purpose I/O pin
  6. PA4 - General-purpose I/O pin
  7. PA5 - General-purpose I/O pin
  8. PA6 - General-purpose I/O pin
  9. PA7 - General-purpose I/O pin
  10. PB0 - General-purpose I/O pin
  11. PB1 - General-purpose I/O pin
  12. PB2 - General-purpose I/O pin
  13. PB3 - General-purpose I/O pin
  14. PB4 - General-purpose I/O pin
  15. PB5 - General-purpose I/O pin
  16. PB6 - General-purpose I/O pin
  17. PB7 - General-purpose I/O pin
  18. RESET - Reset pin
  19. VSS - Ground
  20. OSCIN/OSCOUT - Oscillator input/output pins

Functional Features

  • High-speed processing capabilities
  • Flexible I/O configurations
  • Built-in communication interfaces for seamless data transfer
  • On-chip memory for program and data storage
  • Timers/counters for precise timing operations
  • Analog-to-digital converter for sensor interfacing
  • Enhanced security features to protect sensitive data

Advantages and Disadvantages

Advantages

  • Compact size and low power consumption make it suitable for portable devices
  • Wide operating voltage range allows for flexibility in various applications
  • Integrated peripherals reduce the need for external components
  • Enhanced security features provide protection against unauthorized access

Disadvantages

  • Limited program and data memory compared to higher-end microcontrollers
  • Limited number of I/O pins may restrict the complexity of certain applications
  • Lack of advanced features found in more specialized microcontrollers

Working Principles

The ST72C254G2M6 operates based on an 8-bit architecture, where instructions are executed sequentially. It utilizes a combination of hardware and software to perform tasks according to the programmed instructions. The microcontroller interacts with external devices through its I/O pins and communication interfaces, enabling data exchange and control.

Detailed Application Field Plans

The ST72C254G2M6 finds applications in various fields, including but not limited to: - Consumer electronics - Industrial automation - Automotive systems - Medical devices - Home appliances

In consumer electronics, it can be used in smart home devices, remote controls, and portable gadgets. In industrial automation, it can be employed for controlling machinery and monitoring processes. In automotive systems, it can be utilized for engine management, dashboard control, and safety features. In medical devices, it can assist in patient monitoring and diagnostics. Lastly, in home appliances, it can be integrated into kitchen appliances, climate control systems, and security devices.

Detailed and Complete Alternative Models

  1. ST72F264G2M6: Similar to the ST72C254G2M6, but with additional features such as a larger program memory size and more I/O pins.
  2. ST72F521AR9T6: A higher-end microcontroller with advanced peripherals, increased program memory, and enhanced security features.
  3. STM8

Énumérez 10 questions et réponses courantes liées à l'application de ST72C254G2M6 dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of ST72C254G2M6 in technical solutions:

  1. Q: What is the ST72C254G2M6 microcontroller used for? A: The ST72C254G2M6 is a microcontroller commonly used in various technical solutions, such as industrial automation, consumer electronics, and automotive applications.

  2. Q: What is the maximum clock frequency supported by the ST72C254G2M6? A: The ST72C254G2M6 supports a maximum clock frequency of 8 MHz.

  3. Q: How much flash memory does the ST72C254G2M6 have? A: The ST72C254G2M6 has 8 KB of flash memory for program storage.

  4. Q: Can I use the ST72C254G2M6 for real-time applications? A: Yes, the ST72C254G2M6 is suitable for real-time applications due to its fast execution speed and interrupt handling capabilities.

  5. Q: Does the ST72C254G2M6 have any built-in communication interfaces? A: Yes, the ST72C254G2M6 features a UART (Universal Asynchronous Receiver-Transmitter) interface for serial communication.

  6. Q: What is the operating voltage range of the ST72C254G2M6? A: The ST72C254G2M6 operates within a voltage range of 2.7V to 5.5V.

  7. Q: Can I use the ST72C254G2M6 in battery-powered applications? A: Yes, the low power consumption of the ST72C254G2M6 makes it suitable for battery-powered applications.

  8. Q: Does the ST72C254G2M6 have any analog-to-digital converters (ADCs)? A: No, the ST72C254G2M6 does not have any built-in ADCs. External ADCs can be used if required.

  9. Q: Can I program the ST72C254G2M6 using a high-level language like C? A: Yes, the ST72C254G2M6 supports programming in C language using appropriate development tools and compilers.

  10. Q: Is the ST72C254G2M6 suitable for low-cost applications? A: Yes, the ST72C254G2M6 is a cost-effective microcontroller option, making it suitable for low-cost applications where advanced features are not required.

Please note that these answers are general and may vary depending on specific application requirements and implementation details.