STMicroelectronics
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
M24C08-FMN6TP
Voir les détails DataSheets

M24C08-FMN6TP

Product Overview

Category

The M24C08-FMN6TP belongs to the category of electrically erasable programmable read-only memory (EEPROM) integrated circuits.

Use

It is used for non-volatile data storage in various electronic devices, including consumer electronics, automotive systems, and industrial applications.

Characteristics

  • Non-volatile memory
  • I2C interface
  • Low power consumption
  • High reliability
  • Wide operating voltage range

Package

The M24C08-FMN6TP is available in a small form factor package, typically a 8-pin SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of M24C08-FMN6TP lies in its ability to store and retrieve data reliably in a wide range of electronic applications.

Packaging/Quantity

The M24C08-FMN6TP is usually supplied in tape and reel packaging with a quantity of 2500 units per reel.

Specifications

  • Memory Capacity: 8 Kbit
  • Interface: I2C
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to 85°C
  • Write Endurance: 4 million cycles
  • Data Retention: 200 years

Detailed Pin Configuration

The M24C08-FMN6TP has the following pin configuration: 1. A0: Chip address input 2. A1: Chip address input 3. A2: Chip address input 4. VSS: Ground 5. SDA: Serial data input/output 6. SCL: Serial clock input 7. WP: Write protect 8. VCC: Power supply

Functional Features

  • Byte and Page Write Modes
  • Random and Sequential Read Modes
  • Write Protection
  • Software Write Control
  • ESD Protection

Advantages

  • Low power consumption
  • High reliability and endurance
  • Wide operating voltage range
  • Small form factor package
  • Easy interfacing with microcontrollers

Disadvantages

  • Limited capacity compared to other EEPROMs
  • Slower write times compared to some competing technologies

Working Principles

The M24C08-FMN6TP operates by using an I2C interface to communicate with a microcontroller or other host device. It stores data in non-volatile memory cells that can be electrically erased and reprogrammed.

Detailed Application Field Plans

The M24C08-FMN6TP is commonly used in applications such as: - Smart meters - Automotive control systems - Industrial automation - Consumer electronics - Medical devices

Detailed and Complete Alternative Models

Some alternative models to M24C08-FMN6TP include: - AT24C08C - CAT24C08 - 24AA08

In conclusion, the M24C08-FMN6TP is a versatile EEPROM IC that offers reliable non-volatile data storage for a wide range of electronic applications.

[Word Count: 411]

Énumérez 10 questions et réponses courantes liées à l'application de M24C08-FMN6TP dans les solutions techniques

  1. What is the M24C08-FMN6TP?

    • The M24C08-FMN6TP is a 8-Kbit I2C-compatible serial EEPROM (Electrically Erasable Programmable Read-Only Memory) with a wide voltage operating range.

  2. What are the typical applications of M24C08-FMN6TP?

    • Typical applications include storing configuration parameters, data logging, and system identification in various electronic devices such as consumer electronics, industrial equipment, and automotive systems.

  3. What is the operating voltage range of M24C08-FMN6TP?

    • The operating voltage range is from 1.7V to 5.5V, making it suitable for a wide variety of applications.

  4. What is the maximum clock frequency supported by M24C08-FMN6TP?

    • The maximum clock frequency supported is 400 kHz, allowing for fast data transfer in I2C communication.

  5. What is the write endurance of M24C08-FMN6TP?

    • The M24C08-FMN6TP has a minimum of 200,000 program/erase cycles, ensuring reliable and durable data storage.

  6. Does M24C08-FMN6TP support software write protection?

    • Yes, it supports software write protection for the entire memory or partial areas, providing flexibility in data security.

  7. What is the package type of M24C08-FMN6TP?

    • The M24C08-FMN6TP comes in an industry-standard 8-lead SO8 package, making it easy to integrate into various PCB designs.

  8. Is M24C08-FMN6TP RoHS compliant?

    • Yes, it is RoHS compliant, meeting environmental standards for lead-free manufacturing.

  9. Can M24C08-FMN6TP operate at extended temperature ranges?

    • Yes, it can operate in extended temperature ranges from -40°C to 125°C, suitable for harsh environmental conditions.

  10. Are there any known reliability issues with M24C08-FMN6TP?

    • There are no known reliability issues with M24C08-FMN6TP when used within its specified operating conditions and guidelines.