L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
M24128-BWMN6TP

M24128-BWMN6TP

Product Overview

Category

M24128-BWMN6TP belongs to the category of non-volatile memory integrated circuits.

Use

This product is primarily used for data storage in various electronic devices such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Non-volatile: The M24128-BWMN6TP retains stored data even when power is removed.
  • High capacity: It has a storage capacity of 128 kilobits (16 kilobytes).
  • Serial interface: The device communicates using a two-wire I2C serial interface.
  • Low power consumption: The M24128-BWMN6TP operates at low power levels, making it suitable for battery-powered devices.

Package

The M24128-BWMN6TP is available in a small surface-mount package. It is commonly packaged in a 5 mm x 4 mm SO8N package.

Essence

The essence of the M24128-BWMN6TP is its ability to store and retrieve data reliably in a compact form factor.

Packaging/Quantity

This product is typically sold in reels or tubes containing multiple units. The exact quantity depends on the supplier and customer requirements.

Specifications

  • Memory Capacity: 128 kilobits (16 kilobytes)
  • Interface: I2C (Two-wire serial interface)
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Data Retention: Up to 200 years
  • Write Endurance: 1 million write cycles

Detailed Pin Configuration

The M24128-BWMN6TP has eight pins arranged as follows:

```


| | | 1 2 3 4 5 | | | | 8 7 6 | |_______________| ```

  1. Chip Select (CS): Used to enable or disable the device.
  2. Serial Clock (SCL): Provides the clock signal for data transfer.
  3. Serial Data Input/Output (SDA): Bi-directional data line for communication.
  4. Ground (GND): Connected to the ground reference of the system.
  5. Write Protect (WP): Optional pin used to protect the memory from accidental writes.
  6. VCC: Power supply input.
  7. Not Connected (NC): No connection required.
  8. Not Connected (NC): No connection required.

Functional Features

  • Random Access: Allows reading and writing of individual bytes within the memory array.
  • Byte Write: Supports byte-level write operations.
  • Page Write: Enables faster write operations by allowing multiple bytes to be written in a single operation.
  • Sequential Read: Facilitates efficient reading of consecutive memory locations.
  • Software Protection: Provides write protection through software commands.
  • Hardware Protection: Optional write protection using the WP pin.

Advantages and Disadvantages

Advantages

  • Non-volatile storage ensures data retention even during power loss.
  • Compact form factor suitable for space-constrained applications.
  • Low power consumption extends battery life.
  • High endurance allows frequent write operations without degradation.
  • Easy integration with microcontrollers and other devices using the I2C interface.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Slower write speeds compared to some other memory types.
  • Vulnerable to electromagnetic interference due to its small size.

Working Principles

The M24128-BWMN6TP utilizes electrically erasable programmable read-only memory (EEPROM) technology. It stores data by trapping electrical charges within floating gate transistors. These charges represent binary values, which can be read or modified using appropriate electrical signals.

Detailed Application Field Plans

The M24128-BWMN6TP finds applications in various fields, including: - Embedded systems - Industrial automation - Automotive electronics - Smart home devices - Wearable technology

Detailed and Complete Alternative Models

Some alternative models to the M24128-BWMN6TP include: - M24128-BFMC6TG - M24128-BRMN6TP - M24128-BWBN6TP - M24128-BFMN6TP

These models offer similar functionality and characteristics but may differ in package type or other minor specifications.

In conclusion, the M24128-BWMN6TP is a non-volatile memory integrated circuit with a storage capacity of 128 kilobits. It features a serial interface, low power consumption, and high endurance. This product finds applications in various fields and has several alternative models available in the market.

Énumérez 10 questions et réponses courantes liées à l'application de M24128-BWMN6TP dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of M24128-BWMN6TP in technical solutions:

  1. Question: What is M24128-BWMN6TP?
    Answer: M24128-BWMN6TP is a specific model of EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by a particular company.

  2. Question: What is the storage capacity of M24128-BWMN6TP?
    Answer: The M24128-BWMN6TP has a storage capacity of 128 kilobits, which is equivalent to 16 kilobytes.

  3. Question: What is the operating voltage range for M24128-BWMN6TP?
    Answer: The operating voltage range for M24128-BWMN6TP is typically between 1.7V and 5.5V.

  4. Question: What is the maximum clock frequency supported by M24128-BWMN6TP?
    Answer: The maximum clock frequency supported by M24128-BWMN6TP is 1 MHz.

  5. Question: Can M24128-BWMN6TP be used in automotive applications?
    Answer: Yes, M24128-BWMN6TP is suitable for automotive applications as it meets the required standards and specifications.

  6. Question: Does M24128-BWMN6TP support both read and write operations?
    Answer: Yes, M24128-BWMN6TP supports both read and write operations, allowing data to be stored and retrieved from the chip.

  7. Question: Is M24128-BWMN6TP compatible with I2C communication protocol?
    Answer: Yes, M24128-BWMN6TP uses the I2C (Inter-Integrated Circuit) communication protocol for interfacing with other devices.

  8. Question: What is the typical endurance of M24128-BWMN6TP?
    Answer: The typical endurance of M24128-BWMN6TP is 1 million write cycles, meaning it can be written to and erased up to 1 million times.

  9. Question: Can M24128-BWMN6TP operate in extreme temperature conditions?
    Answer: Yes, M24128-BWMN6TP has a wide operating temperature range of -40°C to +85°C, making it suitable for various environments.

  10. Question: Is M24128-BWMN6TP RoHS compliant?
    Answer: Yes, M24128-BWMN6TP is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for M24128-BWMN6TP.