The 74VHC16373TTR belongs to the category of integrated circuits (ICs) and specifically falls under the family of flip-flops.
This IC is commonly used in digital electronic systems for data storage and transfer applications. It serves as an octal transparent latch with 3-state outputs.
The 74VHC16373TTR is available in a TSSOP (Thin Shrink Small Outline Package) package. This package offers a compact size and allows for easy integration into various electronic systems.
The essence of the 74VHC16373TTR lies in its ability to store and transfer data efficiently within digital electronic systems. It provides reliable and high-speed operation while consuming minimal power.
The 74VHC16373TTR is typically packaged in reels, containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer and customer requirements.
The 74VHC16373TTR has a total of 48 pins, which are divided into two groups: input pins and output pins. The pin configuration is as follows:
The 74VHC16373TTR offers the following functional features:
The 74VHC16373TTR operates based on the principles of flip-flops. Each latch within the IC can store a single bit of data. When the latch enable (LE) input is high, the data at the corresponding data (D) input is transferred to the latch's output. The outputs are controlled by the output enable (OE) input. When OE is low, the outputs are active and reflect the stored data. When OE is high, the outputs are in a high-impedance state.
The 74VHC16373TTR finds applications in various digital electronic systems, including:
Some alternative models that offer similar functionality to the 74VHC16373TTR include:
These alternative models can be considered based on specific requirements and availability.
In conclusion, the 74VHC16373TTR is a versatile integrated circuit used for data storage and transfer applications. Its high-speed operation, low power consumption, and reliable performance make it suitable for various digital electronic systems.
Sure! Here are 10 common questions and answers related to the application of 74VHC16373TTR in technical solutions:
Q: What is the 74VHC16373TTR? A: The 74VHC16373TTR is a 16-bit transparent D-type latch with 3-state outputs, commonly used in digital logic circuits.
Q: What is the purpose of a transparent latch? A: A transparent latch allows data to pass through when its enable input is active, providing real-time data storage and transfer capabilities.
Q: How many bits can the 74VHC16373TTR handle? A: The 74VHC16373TTR can handle 16 bits of data.
Q: What does "3-state outputs" mean? A: 3-state outputs allow the outputs of the latch to be in three different states: high, low, or high-impedance (disconnected).
Q: What voltage levels does the 74VHC16373TTR support? A: The 74VHC16373TTR supports a wide range of voltage levels, typically between 2V and 5.5V.
Q: Can I use the 74VHC16373TTR in both CMOS and TTL logic systems? A: Yes, the 74VHC16373TTR is compatible with both CMOS and TTL logic systems.
Q: What is the maximum clock frequency supported by the 74VHC16373TTR? A: The maximum clock frequency supported by the 74VHC16373TTR is typically around 200 MHz.
Q: Can I cascade multiple 74VHC16373TTR latches together? A: Yes, you can cascade multiple 74VHC16373TTR latches to increase the number of bits handled.
Q: What is the power supply voltage range for the 74VHC16373TTR? A: The power supply voltage range for the 74VHC16373TTR is typically between 2V and 5.5V.
Q: Are there any specific precautions I should take when using the 74VHC16373TTR? A: It is important to ensure that the input voltage levels are within the specified range and to properly handle the enable and clock inputs to avoid potential issues with data integrity.
Please note that these answers are general and may vary depending on the specific application and datasheet specifications of the 74VHC16373TTR.