Voir les spécifications pour les détails du produit.
SI7210-B-00-IV
Product Overview
Category
The SI7210-B-00-IV belongs to the category of Hall Effect sensors.
Use
It is used for detecting the presence of a magnetic field and converting it into an electrical signal.
Characteristics
- High sensitivity to magnetic fields
- Low power consumption
- Compact size
- Wide operating temperature range
Package
The SI7210-B-00-IV is available in a small surface-mount package.
Essence
The essence of the SI7210-B-00-IV lies in its ability to accurately detect and measure magnetic fields in various applications.
Packaging/Quantity
It is typically supplied in reels containing a specific quantity, such as 2500 units per reel.
Specifications
- Operating Voltage: 2.4V to 5.5V
- Output Type: Digital
- Operating Temperature: -40°C to 125°C
- Sensitivity: 24 Gauss
Detailed Pin Configuration
The SI7210-B-00-IV has a standard 4-pin configuration: 1. VDD (Power supply) 2. GND (Ground) 3. OUT (Digital output) 4. GND (Ground)
Functional Features
- Digital output for easy interfacing with microcontrollers
- Built-in temperature compensation for accurate measurements across temperature variations
- Sleep mode for low-power operation
Advantages
- High sensitivity allows for precise magnetic field detection
- Wide operating temperature range enables use in diverse environments
- Low power consumption prolongs battery life in portable devices
Disadvantages
- Limited to digital output only, may not be suitable for analog applications
- Sensitive to electromagnetic interference in certain scenarios
Working Principles
The SI7210-B-00-IV operates based on the Hall Effect, where the presence of a magnetic field causes a voltage difference across the sensor, which is then converted into a digital output signal.
Detailed Application Field Plans
The SI7210-B-00-IV is widely used in: - Proximity sensing in consumer electronics - Position sensing in automotive applications - Current sensing in industrial equipment
Detailed and Complete Alternative Models
Some alternative models to the SI7210-B-00-IV include: - SI7210-A-00-IV: Similar specifications with a different sensitivity range - SI7211-B-00-IV: Enhanced features for more demanding applications
In conclusion, the SI7210-B-00-IV Hall Effect sensor offers high sensitivity, low power consumption, and a compact form factor, making it suitable for various applications requiring accurate magnetic field detection.
[Word count: 366]
Énumérez 10 questions et réponses courantes liées à l'application de SI7210-B-00-IV dans les solutions techniques
What is the SI7210-B-00-IV used for in technical solutions?
- The SI7210-B-00-IV is a Hall effect sensor that can be used for non-contact sensing of magnetic fields, making it suitable for applications such as position sensing, proximity detection, and current sensing.
What is the operating voltage range of the SI7210-B-00-IV?
- The operating voltage range of the SI7210-B-00-IV is typically between 3.0V and 3.6V.
What is the output format of the SI7210-B-00-IV?
- The SI7210-B-00-IV provides a digital output in the form of an I2C interface, making it easy to integrate into digital systems.
Can the SI7210-B-00-IV be used for high-temperature applications?
- Yes, the SI7210-B-00-IV is designed to operate over a wide temperature range, making it suitable for high-temperature environments.
What is the sensitivity of the SI7210-B-00-IV?
- The sensitivity of the SI7210-B-00-IV can be configured using its internal registers, allowing for customization based on specific application requirements.
Is the SI7210-B-00-IV suitable for battery-powered applications?
- Yes, the SI7210-B-00-IV has low power consumption, making it suitable for battery-powered applications where energy efficiency is crucial.
Can the SI7210-B-00-IV be used for linear position sensing?
- Yes, the SI7210-B-00-IV can be used for linear position sensing by detecting the presence and strength of a magnetic field along a linear path.
Does the SI7210-B-00-IV require external calibration?
- The SI7210-B-00-IV features integrated calibration capabilities, reducing the need for external calibration in most applications.
What are the typical applications of the SI7210-B-00-IV in technical solutions?
- Typical applications include brushless DC motor control, flow meters, and industrial automation where accurate and reliable magnetic field sensing is required.
Is the SI7210-B-00-IV immune to environmental interference?
- The SI7210-B-00-IV features built-in compensation techniques to minimize the effects of environmental interference, ensuring robust performance in challenging conditions.