SICK, Inc.
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
IME12-04BPSVC0K

IME12-04BPSVC0K

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage, compact size
Package: SOT-223
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage: 3.3V
  • Maximum Output Current: 1.2A
  • Dropout Voltage: 300mV at 1A
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage for better regulation
  • Thermal shutdown and current limit protection
  • Fast transient response for sudden load changes

Advantages

  • Small package size for space-constrained applications
  • Wide input voltage range for versatility
  • Excellent line and load regulation

Disadvantages

  • Limited maximum output current compared to some competitors
  • Higher dropout voltage at higher currents

Working Principles

IME12-04BPSVC0K is a linear voltage regulator that maintains a stable output voltage despite variations in the input voltage or load. It achieves this by using a feedback loop to adjust its internal circuitry, ensuring a consistent output.

Detailed Application Field Plans

This voltage regulator is suitable for various applications, including: - Battery-powered devices - Embedded systems - Consumer electronics - Industrial control systems

Detailed and Complete Alternative Models

  1. IME12-05BPSVC0K: 5V output voltage variant
  2. IME12-33BPSVC0K: 3.3V output voltage variant
  3. IME12-15BPSVC0K: 15V output voltage variant

The IME12-04BPSVC0K is a versatile voltage regulator with a compact form factor and efficient performance. Its wide input voltage range and thermal protection make it suitable for various electronic applications, despite limitations in maximum output current. This component's detailed pin configuration and working principles provide insight into its functionality, while alternative models offer flexibility for different voltage requirements.

Énumérez 10 questions et réponses courantes liées à l'application de IME12-04BPSVC0K dans les solutions techniques

  1. What is IME12-04BPSVC0K?

    • IME12-04BPSVC0K is a pressure sensor designed for industrial applications, capable of measuring and monitoring pressure in various technical solutions.

  2. What is the operating voltage range of IME12-04BPSVC0K?

    • The operating voltage range of IME12-04BPSVC0K is typically 10-30V DC.

  3. What is the output signal of IME12-04BPSVC0K?

    • IME12-04BPSVC0K provides a standardized 4-20mA output signal, making it compatible with many industrial control systems.

  4. What is the pressure range that IME12-04BPSVC0K can measure?

    • IME12-04BPSVC0K is available in various pressure ranges, such as 0-1 bar, 0-10 bar, or 0-100 bar, allowing for flexibility in different technical solutions.

  5. Is IME12-04BPSVC0K suitable for use in harsh environments?

    • Yes, IME12-04BPSVC0K is designed to withstand harsh industrial environments, featuring robust construction and protection against dust and water ingress.

  6. Can IME12-04BPSVC0K be used for measuring both liquids and gases?

    • Yes, IME12-04BPSVC0K is suitable for measuring the pressure of both liquids and gases, making it versatile for various technical solutions.

  7. Does IME12-04BPSVC0K require calibration?

    • IME12-04BPSVC0K is factory-calibrated, but periodic recalibration may be necessary depending on the application and environmental conditions.

  8. What is the temperature range for operation of IME12-04BPSVC0K?

    • IME12-04BPSVC0K is designed to operate within a temperature range of -25°C to 85°C, ensuring reliable performance in diverse technical solutions.

  9. Is IME12-04BPSVC0K compatible with industry-standard mounting fittings?

    • Yes, IME12-04BPSVC0K is designed with compatibility for industry-standard mounting fittings, facilitating easy integration into technical solutions.

  10. Can IME12-04BPSVC0K provide real-time pressure readings to a control system?

    • Yes, IME12-04BPSVC0K can provide real-time pressure readings to a control system through its 4-20mA output, enabling precise monitoring and control in technical solutions.