Voir les spécifications pour les détails du produit.
GP2D120CJ00F
Product Overview
The GP2D120CJ00F belongs to the category of proximity sensors and is commonly used for distance measurement in various electronic applications. This sensor is known for its compact size, accurate readings, and ease of integration into different systems. The package includes the sensor itself along with any necessary connectors or mounting hardware. Its essence lies in providing reliable distance sensing capabilities, making it a valuable component in robotics, automation, and consumer electronics. The packaging typically consists of individual units, and the quantity may vary based on the supplier.
Specifications
- Operating Range: 4cm to 30cm
- Supply Voltage: 4.5V to 5.5V
- Average Current Consumption: 33mA
- Output Type: Analog voltage
- Dimensions: 45mm x 18.9mm x 21.6mm
Detailed Pin Configuration
The GP2D120CJ00F features three pins: 1. VCC (Power supply) 2. GND (Ground) 3. Vo (Analog output)
Functional Features
- Accurate distance measurement within the specified range
- Compact and lightweight design
- Low power consumption
- Analog output for easy interfacing with microcontrollers
Advantages and Disadvantages
Advantages
- Reliable and accurate distance measurements
- Easy to integrate into various electronic systems
- Low power consumption
- Compact form factor
Disadvantages
- Limited operating range compared to some other proximity sensors
- Susceptible to interference from ambient light and reflective surfaces
Working Principles
The GP2D120CJ00F operates on the principle of triangulation using infrared light. It emits an infrared beam and measures the time it takes for the beam to be reflected back to the sensor. By analyzing this time delay, the sensor can accurately determine the distance to the target object.
Detailed Application Field Plans
The GP2D120CJ00F finds extensive use in the following applications: - Obstacle detection in robotics - Proximity sensing in automated dispensing systems - Distance measurement in consumer electronics such as hand dryers and automatic faucets - Object detection in industrial automation
Detailed and Complete Alternative Models
Some alternative models to the GP2D120CJ00F include: - Sharp GP2Y0A21YK0F (10cm to 80cm range) - Pololu Carrier with Sharp GP2Y0A60SZLF Analog Distance Sensor (10cm to 150cm range) - Adafruit VL6180X Time of Flight Distance Sensor (up to 200cm range)
In conclusion, the GP2D120CJ00F proximity sensor offers reliable and accurate distance measurement capabilities within a compact form factor. While it has certain limitations, its functional features and working principles make it suitable for a wide range of applications in the field of electronics and automation.
Word count: 423
Énumérez 10 questions et réponses courantes liées à l'application de GP2D120CJ00F dans les solutions techniques
What is the GP2D120CJ00F sensor used for?
- The GP2D120CJ00F sensor is commonly used for distance measurement in technical solutions.
What is the operating voltage of the GP2D120CJ00F sensor?
- The operating voltage of the GP2D120CJ00F sensor is typically 4.5V to 5.5V.
How does the GP2D120CJ00F sensor measure distance?
- The GP2D120CJ00F sensor uses infrared light to measure distance based on the reflection time of the emitted light.
What is the sensing range of the GP2D120CJ00F sensor?
- The sensing range of the GP2D120CJ00F sensor is approximately 4cm to 30cm.
Can the GP2D120CJ00F sensor be used in outdoor environments?
- The GP2D120CJ00F sensor is best suited for indoor environments due to its sensitivity to ambient light and weather conditions.
What are some common applications of the GP2D120CJ00F sensor?
- Common applications include robotics, proximity detection, object avoidance, and automated systems requiring distance measurements.
Does the GP2D120CJ00F sensor require calibration?
- Yes, the GP2D120CJ00F sensor may require calibration to ensure accurate distance measurements.
Is the GP2D120CJ00F sensor compatible with microcontrollers?
- Yes, the GP2D120CJ00F sensor can be interfaced with various microcontrollers using analog or digital input/output methods.
What are the typical output characteristics of the GP2D120CJ00F sensor?
- The GP2D120CJ00F sensor typically provides an analog output voltage proportional to the measured distance.
Are there any limitations to consider when using the GP2D120CJ00F sensor?
- Some limitations include its sensitivity to reflective surfaces, ambient light interference, and the need for consistent power supply for accurate measurements.