ON Semiconductor
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
NCP81295MNTXG
Voir les détails DataSheets

NCP81295MNTXG

Product Overview

Category

NCP81295MNTXG belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Integrated circuit
  • Voltage regulation
  • Power management

Package

The NCP81295MNTXG is available in a small outline no-lead (SON) package.

Essence

The essence of this product lies in its ability to regulate voltage and manage power efficiently in electronic devices.

Packaging/Quantity

The NCP81295MNTXG is typically packaged in reels, with each reel containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

The following are the specifications of the NCP81295MNTXG:

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.3V
  • Maximum Output Current: 1.5A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to 85°C
  • Package Type: SON

Detailed Pin Configuration

The NCP81295MNTXG has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin

Functional Features

The NCP81295MNTXG offers the following functional features:

  • High efficiency voltage regulation
  • Overcurrent protection
  • Thermal shutdown protection
  • Enable/disable control

Advantages and Disadvantages

Advantages: - High efficiency operation - Compact size - Overcurrent and thermal protection

Disadvantages: - Limited output current capacity - Restricted input voltage range

Working Principles

The NCP81295MNTXG works by regulating the input voltage to a desired output voltage level using internal circuitry. It continuously monitors the output voltage and adjusts the internal components to maintain a stable output.

Detailed Application Field Plans

The NCP81295MNTXG is commonly used in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable gaming consoles - Wearable devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the NCP81295MNTXG are: - LM2596S-ADJ - TPS54331 - LT1763

These alternative models offer similar functionality and can be used as replacements depending on specific requirements.

In conclusion, the NCP81295MNTXG is an integrated circuit used for voltage regulation and power management in electronic devices. It offers high efficiency, compact size, and various protection features. While it has limitations in terms of output current capacity and input voltage range, it is widely used in applications such as mobile phones, tablets, portable gaming consoles, and wearable devices. Alternative models like LM2596S-ADJ, TPS54331, and LT1763 can also be considered based on specific needs.

Énumérez 10 questions et réponses courantes liées à l'application de NCP81295MNTXG dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of NCP81295MNTXG in technical solutions:

  1. Q: What is NCP81295MNTXG? A: NCP81295MNTXG is a voltage regulator IC (integrated circuit) commonly used in power management applications.

  2. Q: What is the input voltage range of NCP81295MNTXG? A: The input voltage range of NCP81295MNTXG is typically between 4.5V and 18V.

  3. Q: What is the output voltage range of NCP81295MNTXG? A: The output voltage range of NCP81295MNTXG can be adjusted from 0.6V to 5.5V.

  4. Q: What is the maximum output current of NCP81295MNTXG? A: The maximum output current of NCP81295MNTXG is typically around 12A.

  5. Q: Does NCP81295MNTXG support synchronous rectification? A: Yes, NCP81295MNTXG supports synchronous rectification for improved efficiency.

  6. Q: Can NCP81295MNTXG operate in a wide temperature range? A: Yes, NCP81295MNTXG is designed to operate reliably in a wide temperature range, typically from -40°C to 125°C.

  7. Q: Is NCP81295MNTXG suitable for automotive applications? A: Yes, NCP81295MNTXG is automotive-grade and can be used in various automotive applications.

  8. Q: Does NCP81295MNTXG have built-in protection features? A: Yes, NCP81295MNTXG includes various protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout.

  9. Q: Can NCP81295MNTXG be used in battery-powered applications? A: Yes, NCP81295MNTXG can be used in battery-powered applications as it supports low-power operation and has a wide input voltage range.

  10. Q: What package options are available for NCP81295MNTXG? A: NCP81295MNTXG is available in different package options, such as QFN (Quad Flat No-Lead) and DFN (Dual Flat No-Lead), to suit different PCB layout requirements.

Please note that the specific details and specifications may vary, so it's always recommended to refer to the datasheet or consult the manufacturer for accurate information.