NB7VQ58MMNTXG

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Signal Conditioning and Timing
• Characteristics: High-speed, Low-power consumption
• Package: QFN (Quad Flat No-leads)
• Essence: Voltage Controlled Oscillator (VCO)
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications and Parameters

• Supply Voltage: 1.8V to 3.3V
• Operating Temperature Range: -40°C to +85°C
• Output Frequency Range: 100MHz to 2.5GHz
• Input Clock Frequency Range: 10MHz to 500MHz
• Phase Noise: -150dBc/Hz at 10kHz offset
• Output Level: LVPECL (Low Voltage Positive Emitter-Coupled Logic)

Detailed and Complete Pin Configuration

1. VDD: Power supply voltage
2. GND: Ground
3. CLKIN: Input clock signal
4. EN: Enable control input
5. OUT: Output signal
6. NC: No connection

Functional Characteristics

• NB7VQ58MMNTXG is a voltage controlled oscillator designed for signal conditioning and timing applications.
• It accepts an input clock signal and generates an output signal with a frequency range of 100MHz to 2.5GHz.
• The output level is LVPECL, which ensures high-speed data transmission.
• The device operates on a supply voltage ranging from 1.8V to 3.3V, making it suitable for various power supply systems.
• It features low phase noise, providing accurate and reliable timing signals.

Advantages and Disadvantages

Advantages: - Wide operating voltage range allows compatibility with different power supply systems. - High-speed operation enables efficient data transmission. - Low phase noise ensures precise timing signals.

Disadvantages: - Limited output frequency range may not meet the requirements of certain applications. - The package type (QFN) may require specialized handling during assembly.

Applicable Range of Products

NB7VQ58MMNTXG is commonly used in the following applications: - Telecommunications equipment - Data communication systems - Test and measurement instruments - Industrial automation devices

Working Principles

The NB7VQ58MMNTXG operates based on the principle of voltage-controlled oscillation. It utilizes an input clock signal to generate an output signal with a frequency determined by the control voltage applied to it. By adjusting the control voltage, the output frequency can be precisely controlled within the specified range.

Detailed Application Field Plans

1. Telecommunications Equipment: The NB7VQ58MMNTXG can be used in base stations, routers, and switches to provide accurate timing signals for data transmission.
2. Data Communication Systems: It can be employed in high-speed data communication systems to ensure reliable synchronization between different network components.
3. Test and Measurement Instruments: The device can be integrated into oscilloscopes, spectrum analyzers, and other test equipment to generate precise timing references.
4. Industrial Automation Devices: It finds application in industrial control systems, PLCs, and robotics, where accurate timing is crucial for synchronized operation.

Detailed Alternative Models

1. NB7VQ58M: Similar to NB7VQ58MMNTXG but available in a different package (TSSOP).
2. NB7VQ58MN: Lower power consumption version of NB7VQ58MMNTXG.
3. NB7VQ58MX: Extended temperature range variant (-40°C to +125°C).

5 Common Technical Questions and Answers

1. Q: What is the maximum output frequency of NB7VQ58MMNTXG? A: The maximum output frequency is 2.5GHz.

2. Q: Can NB7VQ58MMNTXG operate with a supply voltage of 5V? A: No, the recommended supply voltage range is 1.8V to 3.3V.

3. Q: What is the typical phase noise performance of NB7VQ58MMNTXG? A: The device exhibits a phase noise of -150dBc/Hz at a 10kHz offset.

4. Q: Is NB7VQ58MMNTXG RoHS compliant? A: Yes, it is compliant with the Restriction of Hazardous Substances directive.

5. Q: How many units are there in a reel of NB7VQ58MMNTXG? A: Each reel contains 2500 units.

[Word count: 607]