ON Semiconductor
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
MC10LVEP11DR2
Voir les détails DataSheets

MC10LVEP11DR2

Overview

Category

MC10LVEP11DR2 belongs to the category of electronic components.

Use

MC10LVEP11DR2 is commonly used in electronic circuits for signal processing and communication applications.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Small package size

Package

MC10LVEP11DR2 is available in a compact surface mount package.

Essence

The essence of MC10LVEP11DR2 lies in its ability to process high-frequency signals with low power consumption.

Packaging/Quantity

MC10LVEP11DR2 is typically packaged in reels or trays, with a quantity of 1000 units per reel/tray.

Specifications and Parameters

  • Operating Voltage Range: 2.375V to 3.8V
  • Input Voltage Range: -2V to VCC + 2V
  • Output Voltage Range: -2V to VCC + 2V
  • Operating Temperature Range: -40°C to +85°C
  • Supply Current: 20mA (typical)

Pin Configuration

The pin configuration of MC10LVEP11DR2 is as follows:

1. VCC 2. Q0 3. Q1 4. Q2 5. Q3 6. /Q3 7. /Q2 8. /Q1 9. /Q0 10. GND

Functional Characteristics

MC10LVEP11DR2 is a quad differential line receiver that operates at high speeds. It accepts differential input signals and provides complementary outputs. The device is designed to work with ECL logic levels and can handle data rates up to several gigabits per second.

Advantages and Disadvantages

Advantages

  • High-speed operation allows for fast signal processing.
  • Low power consumption helps in reducing overall system power requirements.
  • Wide operating voltage range provides flexibility in various applications.
  • Small package size enables compact circuit designs.

Disadvantages

  • Requires additional ECL logic level interface for compatibility with other logic families.
  • Limited availability of alternative models may restrict design options in certain cases.

Applicable Range of Products

MC10LVEP11DR2 is suitable for use in a wide range of products, including: - High-speed data communication systems - Networking equipment - Test and measurement instruments - Industrial control systems - Medical devices

Working Principles

MC10LVEP11DR2 operates based on the principles of differential signaling. It receives differential input signals and converts them into complementary output signals. The device uses ECL logic levels to ensure high-speed operation and reliable signal transmission.

Detailed Application Field Plans

MC10LVEP11DR2 can be used in various application fields, such as: 1. High-speed data transmission in telecommunications networks 2. Clock distribution in digital systems 3. Signal conditioning in test and measurement equipment 4. Data reception in industrial control systems 5. Precision timing in scientific instruments

Detailed Alternative Models

While MC10LVEP11DR2 is a popular choice, there are alternative models available from different manufacturers. Some of the alternatives include: - MC100EP11 - SN65EPT11 - SY100EP11

5 Common Technical Questions and Answers

  1. Q: What is the maximum data rate supported by MC10LVEP11DR2? A: MC10LVEP11DR2 can handle data rates up to several gigabits per second.

  2. Q: Can MC10LVEP11DR2 operate at lower voltages? A: No, the operating voltage range for MC10LVEP11DR2 is 2.375V to 3.8V.

  3. Q: Is MC10LVEP11DR2 compatible with TTL logic levels? A: No, MC10LVEP11DR2 uses ECL logic levels and requires an interface for compatibility with TTL logic.

  4. Q: What is the power consumption of MC10LVEP11DR2? A: The typical supply current for MC10LVEP11DR2 is 20mA.

  5. Q: Can MC10LVEP11DR2 be used in medical devices? A: Yes, MC10LVEP11DR2 is suitable for use in medical devices that require high-speed signal processing.

This concludes the encyclopedia entry for MC10LVEP11DR2.