ON Semiconductor
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
MC100EPT26MNR4G
Voir les détails DataSheets

MC100EPT26MNR4G

Product Overview

  • Category: Integrated Circuit
  • Use: Signal Converter
  • Characteristics: High-speed, Low-power, Differential Input/Output
  • Package: 28-pin PLCC (Plastic Leaded Chip Carrier)
  • Essence: Converts signals between different logic families
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: 3.0V to 5.5V
  • Input Voltage Range: -2.0V to VCC + 2.0V
  • Output Voltage Range: -2.0V to VCC + 2.0V
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay: 1.5 ns typical
  • Maximum Frequency: 1.6 GHz

Detailed Pin Configuration

The MC100EPT26MNR4G has a total of 28 pins. The pin configuration is as follows:

  1. VCC
  2. Q0
  3. Q1
  4. Q2
  5. Q3
  6. Q4
  7. Q5
  8. Q6
  9. Q7
  10. GND
  11. D0
  12. D1
  13. D2
  14. D3
  15. D4
  16. D5
  17. D6
  18. D7
  19. /EN
  20. /RST
  21. /CLK
  22. CLK
  23. /Q0
  24. /Q1
  25. /Q2
  26. /Q3
  27. /Q4
  28. /Q5

Functional Features

  • Converts differential ECL (Emitter-Coupled Logic) input signals to TTL (Transistor-Transistor Logic) output signals
  • Supports high-speed data transmission up to 1.6 GHz
  • Low power consumption for efficient operation
  • Provides reliable signal conversion between different logic families

Advantages and Disadvantages

Advantages: - High-speed signal conversion - Wide operating voltage range - Compact PLCC package for easy integration - Reliable performance in various temperature conditions

Disadvantages: - Limited pin configuration options - Requires external components for complete functionality

Working Principles

The MC100EPT26MNR4G operates by receiving differential ECL input signals through pins D0-D7. These signals are then converted to TTL logic levels using internal circuitry. The converted signals are available at the Q0-Q5 output pins. The /EN, /RST, /CLK, and CLK pins control the enable, reset, and clock functions of the device.

Detailed Application Field Plans

The MC100EPT26MNR4G is commonly used in applications that require signal conversion between ECL and TTL logic families. Some specific application fields include:

  1. Telecommunications: Signal conversion in high-speed data communication systems.
  2. Networking: Interface conversion between different network protocols.
  3. Industrial Automation: Integration of ECL and TTL devices in control systems.
  4. Test and Measurement: Signal processing and conversion in test equipment.

Detailed and Complete Alternative Models

  1. MC100EP116FAR2G
  2. MC100ELT21DR2G
  3. MC100LVEL11DTR2G
  4. MC100LVEP210FA
  5. MC100LVEL56DWR2G

These alternative models offer similar functionality and can be used as replacements for the MC100EPT26MNR4G in various applications.

Word count: 389 words

Énumérez 10 questions et réponses courantes liées à l'application de MC100EPT26MNR4G dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of MC100EPT26MNR4G in technical solutions:

  1. Question: What is MC100EPT26MNR4G?
    Answer: MC100EPT26MNR4G is a high-speed differential receiver designed for use in various applications, including telecommunications, data communications, and networking.

  2. Question: What is the operating voltage range of MC100EPT26MNR4G?
    Answer: The operating voltage range of MC100EPT26MNR4G is typically between -3.0V and -5.5V.

  3. Question: What is the maximum data rate supported by MC100EPT26MNR4G?
    Answer: MC100EPT26MNR4G can support data rates up to 3.8 Gbps.

  4. Question: Can MC100EPT26MNR4G be used in both single-ended and differential applications?
    Answer: No, MC100EPT26MNR4G is specifically designed for differential applications.

  5. Question: What is the input voltage swing requirement for MC100EPT26MNR4G?
    Answer: The input voltage swing requirement for MC100EPT26MNR4G is typically 200 mV.

  6. Question: Does MC100EPT26MNR4G have built-in termination resistors?
    Answer: No, MC100EPT26MNR4G does not have built-in termination resistors. External termination resistors are required for proper operation.

  7. Question: Can MC100EPT26MNR4G be used in high-speed clock distribution systems?
    Answer: Yes, MC100EPT26MNR4G is suitable for high-speed clock distribution systems due to its fast propagation delay and low skew characteristics.

  8. Question: What is the output voltage swing of MC100EPT26MNR4G?
    Answer: The output voltage swing of MC100EPT26MNR4G is typically 800 mV.

  9. Question: Is MC100EPT26MNR4G compatible with other ECL logic families?
    Answer: Yes, MC100EPT26MNR4G is compatible with other ECL logic families, allowing for easy integration into existing systems.

  10. Question: Can MC100EPT26MNR4G be used in harsh environments?
    Answer: MC100EPT26MNR4G has a wide operating temperature range and is designed to withstand harsh environmental conditions, making it suitable for various applications.

Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.