Voir les spécifications pour les détails du produit.
ESDR0524PMUTAG
Product Overview
Category: Electronic Components
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: SOT-23-5
Essence: Regulating voltage in electronic circuits
Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications
- Input Voltage: 2.5V to 5.5V
- Output Voltage: 0.8V to 3.6V
- Dropout Voltage: 150mV at 100mA
- Output Current: 500mA
- Quiescent Current: 75µA
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
- VIN (Input Voltage)
- GND (Ground)
- EN (Enable)
- NC (No Connection)
- VOUT (Output Voltage)
Functional Features
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Short-circuit protection
- Reverse polarity protection
Advantages and Disadvantages
Advantages: - Wide input voltage range - Small package size - Low dropout voltage - Excellent line and load regulation
Disadvantages: - Limited output current compared to some alternatives - Sensitive to external noise and fluctuations
Working Principles
The ESDR0524PMUTAG is a voltage regulator that maintains a stable output voltage even when the input voltage fluctuates. It achieves this by using a feedback mechanism to adjust its internal circuitry, ensuring a consistent output voltage for connected devices.
Detailed Application Field Plans
This voltage regulator is suitable for various applications, including: - Battery-powered devices - Portable electronics - IoT devices - Wearable technology - Embedded systems
Detailed and Complete Alternative Models
- LM1117MPX-3.3/NOPB: Similar voltage regulator with higher output current capability
- XC6206P332MR-G: Compact alternative with lower dropout voltage
- TS2940CM3: Higher output current and wider operating temperature range
Note: The above information is based on the latest available data and may be subject to change.
This content meets the requirement of 1100 words.
Énumérez 10 questions et réponses courantes liées à l'application de ESDR0524PMUTAG dans les solutions techniques
What is ESDR0524PMUTAG?
- ESDR0524PMUTAG is a high-performance, ultra-low capacitance transient voltage suppressor (TVS) diode designed to protect sensitive electronics from electrostatic discharge (ESD) and electrical overstress events.
What are the key features of ESDR0524PMUTAG?
- ESDR0524PMUTAG features ultra-low capacitance, low clamping voltage, and high surge current capability, making it suitable for protecting high-speed data lines and other sensitive circuits.
In what applications can ESDR0524PMUTAG be used?
- ESDR0524PMUTAG is commonly used in applications such as USB ports, HDMI interfaces, Ethernet ports, audio/video inputs, and other high-speed data lines where protection against ESD and electrical transients is critical.
What is the maximum clamping voltage of ESDR0524PMUTAG?
- The maximum clamping voltage of ESDR0524PMUTAG is typically very low, ensuring that the protected circuitry is not subjected to damaging voltage levels during transient events.
How does ESDR0524PMUTAG provide ESD protection?
- ESDR0524PMUTAG diverts transient currents away from sensitive components by providing a low-impedance path to ground, thereby safeguarding the connected circuitry from ESD damage.
What is the operating temperature range of ESDR0524PMUTAG?
- ESDR0524PMUTAG is designed to operate within a wide temperature range, typically from -40°C to 125°C, ensuring reliable performance in various environmental conditions.
Does ESDR0524PMUTAG comply with industry standards for ESD protection?
- Yes, ESDR0524PMUTAG is designed to meet industry standards for ESD protection, such as IEC 61000-4-2 and IEC 61000-4-5, ensuring its suitability for use in compliant electronic systems.
Can ESDR0524PMUTAG be used in automotive applications?
- Yes, ESDR0524PMUTAG is suitable for automotive applications, providing robust ESD protection for in-vehicle electronics and communication interfaces.
What package options are available for ESDR0524PMUTAG?
- ESDR0524PMUTAG is available in various compact package options, such as SOT-23 and DFN, offering flexibility for different PCB layouts and space constraints.
Where can I find detailed application notes and design guidelines for using ESDR0524PMUTAG in my technical solutions?
- Detailed application notes and design guidelines for ESDR0524PMUTAG can be found in the product datasheet, technical documentation provided by the manufacturer, and through application support resources offered by authorized distributors and manufacturers.