ON Semiconductor
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
ESD7C3.3DT5G
Voir les détails DataSheets

ESD7C3.3DT5G

Product Overview

Category

The ESD7C3.3DT5G belongs to the category of ESD (Electrostatic Discharge) protection devices.

Use

It is used to protect electronic circuits and components from damage due to electrostatic discharge events.

Characteristics

  • Low capacitance
  • High surge capability
  • Fast response time

Package

The ESD7C3.3DT5G is available in a small surface-mount package, typically tape and reel for automated assembly.

Essence

The essence of the ESD7C3.3DT5G lies in its ability to divert and dissipate electrostatic discharges away from sensitive electronic components.

Packaging/Quantity

It is typically packaged in reels of 3000 units.

Specifications

  • Breakdown Voltage: 3.3V
  • Capacitance: <5pF
  • Peak Pulse Current: 10A
  • Operating Temperature Range: -55°C to 125°C

Detailed Pin Configuration

The ESD7C3.3DT5G typically has two pins, with a standard SOT-23 package configuration.

Functional Features

  • Provides transient voltage suppression during ESD events
  • Fast response time ensures minimal impact on circuit operation
  • Low capacitance minimizes signal distortion

Advantages and Disadvantages

Advantages

  • Effective protection against ESD events
  • Small form factor for space-constrained designs
  • Wide operating temperature range

Disadvantages

  • Limited peak pulse current compared to some higher-rated devices
  • Requires careful PCB layout for optimal performance

Working Principles

The ESD7C3.3DT5G works by shunting excess voltage from ESD events to ground, preventing it from reaching sensitive components.

Detailed Application Field Plans

The ESD7C3.3DT5G is commonly used in: - Consumer electronics - Telecommunications equipment - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to the ESD7C3.3DT5G include: - ESD9B3.3ST5G - PESD3V3L1UA,115 - TPD2E007DBZR

In conclusion, the ESD7C3.3DT5G is a crucial component in protecting electronic devices from ESD events, offering a balance of performance and size for a wide range of applications.

[Word count: 346]

Énumérez 10 questions et réponses courantes liées à l'application de ESD7C3.3DT5G dans les solutions techniques

  1. What is ESD7C3.3DT5G?

    • ESD7C3.3DT5G is a transient voltage suppressor diode designed to protect sensitive electronic components from electrostatic discharge (ESD) and other transient voltage events.

  2. What are the typical applications of ESD7C3.3DT5G?

    • ESD7C3.3DT5G is commonly used in various technical solutions such as USB ports, HDMI interfaces, Ethernet ports, and other high-speed data lines to protect against ESD and surge events.

  3. What is the maximum clamping voltage of ESD7C3.3DT5G?

    • The maximum clamping voltage of ESD7C3.3DT5G is typically around 10 volts, providing effective protection for sensitive electronics.

  4. What is the breakdown voltage of ESD7C3.3DT5G?

    • The breakdown voltage of ESD7C3.3DT5G is 3.3 volts, which means it starts conducting when the voltage exceeds this level, diverting excess current away from the protected circuit.

  5. How does ESD7C3.3DT5G provide ESD protection?

    • ESD7C3.3DT5G provides ESD protection by shunting transient voltages to ground, preventing them from reaching and damaging sensitive components.

  6. Can ESD7C3.3DT5G be used in high-speed data lines?

    • Yes, ESD7C3.3DT5G is suitable for use in high-speed data lines, including USB 3.0, HDMI, and Ethernet, where it helps maintain signal integrity while providing ESD protection.

  7. What is the capacitance of ESD7C3.3DT5G?

    • The capacitance of ESD7C3.3DT5G is typically very low, ensuring minimal impact on signal quality in high-speed applications.

  8. Is ESD7C3.3DT5G RoHS compliant?

    • Yes, ESD7C3.3DT5G is RoHS compliant, meeting the requirements for restriction of hazardous substances in electronic components.

  9. What is the operating temperature range of ESD7C3.3DT5G?

    • The operating temperature range of ESD7C3.3DT5G is typically -55°C to 125°C, making it suitable for a wide range of environmental conditions.

  10. Are there any specific layout considerations when using ESD7C3.3DT5G in a design?

    • It is recommended to follow the manufacturer's guidelines for layout and placement to ensure optimal performance of ESD7C3.3DT5G in a given technical solution.