ON Semiconductor
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
74ABT574CMTC
Voir les détails DataSheets

Encyclopedia Entry: 74ABT574CMTC

Product Overview

Category

The 74ABT574CMTC belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in digital electronic systems for data storage and transfer applications.

Characteristics

  • High-speed operation
  • Low power consumption
  • Compatibility with TTL input/output levels
  • Wide operating voltage range
  • Robustness against noise and interference

Package

The 74ABT574CMTC is available in a small outline package (SOIC) format.

Essence

This IC is an octal D-type flip-flop with a transparent latch, designed for high-speed data transfer and storage.

Packaging/Quantity

The 74ABT574CMTC is typically packaged in reels or tubes, containing a quantity of 250 units per package.

Specifications

  • Supply Voltage Range: 4.5V to 5.5V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +85°C
  • Propagation Delay Time: 3.5 ns (max)
  • Output Current: ±24 mA

Detailed Pin Configuration

The 74ABT574CMTC has a total of 20 pins, which are assigned as follows:

  1. Pin 1: Output Q0
  2. Pin 2: Output Q1
  3. Pin 3: Output Q2
  4. Pin 4: Output Q3
  5. Pin 5: Output Q4
  6. Pin 6: Output Q5
  7. Pin 7: Output Q6
  8. Pin 8: Output Q7
  9. Pin 9: GND (Ground)
  10. Pin 10: Data Input D0
  11. Pin 11: Data Input D1
  12. Pin 12: Data Input D2
  13. Pin 13: Data Input D3
  14. Pin 14: Data Input D4
  15. Pin 15: Data Input D5
  16. Pin 16: Data Input D6
  17. Pin 17: Data Input D7
  18. Pin 18: Clock Input (CLK)
  19. Pin 19: Output Enable (OE)
  20. Pin 20: VCC (Supply Voltage)

Functional Features

  • Transparent latch for real-time data input
  • High-speed operation for efficient data transfer
  • Compatibility with TTL logic levels for easy integration into existing systems
  • Output enable function for flexible control of output states
  • Robustness against noise and interference for reliable performance

Advantages and Disadvantages

Advantages

  • High-speed operation allows for quick data processing.
  • Low power consumption contributes to energy efficiency.
  • Wide operating voltage range enables compatibility with various systems.
  • Robustness against noise ensures reliable data transmission.

Disadvantages

  • Limited output current may restrict certain applications requiring higher current capabilities.
  • The small outline package (SOIC) format may not be suitable for all system designs.

Working Principles

The 74ABT574CMTC operates based on the principles of flip-flops and latches. It stores and transfers data using a clock signal and transparent latch functionality. When the clock input (CLK) is triggered, the IC captures the data inputs (D0-D7) and holds them until the next clock cycle. The output enable (OE) pin controls the state of the outputs (Q0-Q7), allowing for selective output activation.

Detailed Application Field Plans

The 74ABT574CMTC finds application in various digital electronic systems, including but not limited to: - Microprocessors and microcontrollers - Data communication systems - Memory modules - Industrial automation equipment - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the 74ABT574CMTC include: - 74HC574: A CMOS-based octal D-type flip-flop with similar characteristics and pin configuration. - SN74LS374: A TTL-based octal D-type flip-flop with comparable features and performance.

These alternative models can be considered based on specific system requirements and compatibility considerations.

Word count: 550 words

Énumérez 10 questions et réponses courantes liées à l'application de 74ABT574CMTC dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of 74ABT574CMTC in technical solutions:

  1. Q: What is the 74ABT574CMTC? A: The 74ABT574CMTC is a type of octal D-type flip-flop with 3-state outputs, commonly used in digital circuits.

  2. Q: What is the purpose of the 74ABT574CMTC? A: The purpose of this component is to store and control the state of digital signals in a circuit.

  3. Q: How many flip-flops are there in the 74ABT574CMTC? A: The 74ABT574CMTC consists of eight individual flip-flops, making it an octal (8-bit) device.

  4. Q: What is the maximum operating frequency of the 74ABT574CMTC? A: The maximum operating frequency of this component is typically specified by the manufacturer and can vary, but it is usually in the range of several hundred megahertz.

  5. Q: Can the 74ABT574CMTC be used for both synchronous and asynchronous applications? A: Yes, the 74ABT574CMTC can be used for both synchronous and asynchronous applications, depending on the specific requirements of the circuit.

  6. Q: What is the voltage supply range for the 74ABT574CMTC? A: The voltage supply range for this component is typically between 4.5V and 5.5V.

  7. Q: Does the 74ABT574CMTC support 3-state outputs? A: Yes, the 74ABT574CMTC has 3-state outputs, which means that the outputs can be disabled or put into a high-impedance state when not in use.

  8. Q: Can the 74ABT574CMTC be cascaded to increase the number of flip-flops? A: Yes, multiple 74ABT574CMTC components can be cascaded together to increase the number of flip-flops and create larger storage registers.

  9. Q: What is the typical power consumption of the 74ABT574CMTC? A: The power consumption of this component depends on various factors such as operating frequency and load conditions, but it is generally low compared to other similar devices.

  10. Q: Are there any specific precautions or considerations when using the 74ABT574CMTC? A: It is important to ensure proper decoupling and bypass capacitors are used for stable operation. Additionally, attention should be given to signal integrity, noise immunity, and proper grounding techniques to minimize potential issues.