NXP USA Inc.
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
PDTA124EE,115
Voir les détails DataSheets

PDTA124EE,115

Product Overview

Category

PDTA124EE,115 belongs to the category of small signal transistors.

Use

It is commonly used in low-power amplification and switching applications.

Characteristics

  • Small size
  • Low power consumption
  • High gain

Package

PDTA124EE,115 is available in a SOT416 (SC-75) package.

Essence

The essence of PDTA124EE,115 lies in its ability to provide reliable and efficient performance in low-power electronic circuits.

Packaging/Quantity

It is typically packaged in reels with a quantity of 3000 units per reel.

Specifications

  • Collector-Base Voltage: 50V
  • Collector Current: 100mA
  • Total Power Dissipation: 200mW
  • Transition Frequency: 250MHz
  • Operating Temperature Range: -65°C to 150°C

Detailed Pin Configuration

PDTA124EE,115 has three pins: 1. Base 2. Emitter 3. Collector

Functional Features

  • High voltage gain
  • Low noise
  • Fast switching speed

Advantages

  • Small form factor
  • Suitable for low-power applications
  • Wide operating temperature range

Disadvantages

  • Limited current and voltage handling capabilities
  • Not suitable for high-power applications

Working Principles

PDTA124EE,115 operates based on the principles of bipolar junction transistor (BJT) amplification and switching.

Detailed Application Field Plans

PDTA124EE,115 is commonly used in: - Audio amplifiers - Sensor interfaces - Signal processing circuits

Detailed and Complete Alternative Models

Some alternative models to PDTA124EE,115 include: - BC847B - 2N3904 - MMBT3904

In conclusion, PDTA124EE,115 is a small signal transistor that offers high gain and low power consumption, making it suitable for various low-power electronic applications.

[Word count: 298]

Énumérez 10 questions et réponses courantes liées à l'application de PDTA124EE,115 dans les solutions techniques

Sure, here are 10 common questions and answers related to the application of PDTA124EE,115 in technical solutions:

  1. What is PDTA124EE,115?

    • PDTA124EE,115 is a high-performance NPN resistor-equipped transistor in a small SOT666 (SC-88) Surface-Mounted Device (SMD) plastic package.

  2. What are the typical applications of PDTA124EE,115?

    • It is commonly used in general-purpose switching and amplification applications in various technical solutions.

  3. What is the maximum collector current of PDTA124EE,115?

    • The maximum collector current is 100 mA.

  4. What is the maximum collector-base voltage of PDTA124EE,115?

    • The maximum collector-base voltage is 50 V.

  5. What is the maximum power dissipation of PDTA124EE,115?

    • The maximum power dissipation is 200 mW.

  6. What are the key features of PDTA124EE,115?

    • Some key features include low collector-emitter saturation voltage, high current gain, and low equivalent series resistance.

  7. Can PDTA124EE,115 be used in high-frequency applications?

    • Yes, it can be used in high-frequency applications due to its high transition frequency.

  8. What are the recommended operating conditions for PDTA124EE,115?

    • The recommended operating conditions include a collector current of 10 mA to 100 mA and an operating temperature range of -65°C to +150°C.

  9. Does PDTA124EE,115 require external resistors for biasing?

    • No, PDTA124EE,115 comes with built-in resistors, making it suitable for direct biasing in many applications.

  10. Are there any specific layout considerations when using PDTA124EE,115 in a circuit?

    • It is important to ensure proper heat dissipation and minimize parasitic capacitance in the layout design when using PDTA124EE,115 in a circuit.

I hope these questions and answers provide helpful information about the application of PDTA124EE,115 in technical solutions. Let me know if you need further assistance!