NXP USA Inc.
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
MC68HRC908JK3CP
Voir les détails DataSheets

MC68HRC908JK3CP

Product Overview

Category

MC68HRC908JK3CP belongs to the category of microcontrollers.

Use

It is primarily used for embedded systems and applications that require control and processing capabilities.

Characteristics

  • High-performance microcontroller
  • Low power consumption
  • Integrated peripherals for enhanced functionality
  • Robust and reliable design

Package

MC68HRC908JK3CP is available in a compact and industry-standard package, making it suitable for various applications.

Essence

The essence of MC68HRC908JK3CP lies in its ability to provide efficient control and processing capabilities within a small form factor.

Packaging/Quantity

This microcontroller is typically packaged individually and is available in various quantities depending on the manufacturer's specifications.

Specifications

  • Architecture: 8-bit
  • Clock Speed: Up to 8 MHz
  • Flash Memory: 4 KB
  • RAM: 256 bytes
  • Operating Voltage: 2.7V to 5.5V
  • I/O Pins: 20
  • Communication Interfaces: UART, SPI, I2C
  • Timers/Counters: 2 x 8-bit, 1 x 16-bit
  • Analog-to-Digital Converter (ADC): 8 channels, 10-bit resolution

Detailed Pin Configuration

The MC68HRC908JK3CP microcontroller has a total of 20 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. RESET - Reset input
  4. IRQ - Interrupt request input
  5. PTA0 - General-purpose I/O pin
  6. PTA1 - General-purpose I/O pin
  7. PTA2 - General-purpose I/O pin
  8. PTA3 - General-purpose I/O pin
  9. PTA4 - General-purpose I/O pin
  10. PTA5 - General-purpose I/O pin
  11. PTA6 - General-purpose I/O pin
  12. PTA7 - General-purpose I/O pin
  13. PTB0 - General-purpose I/O pin
  14. PTB1 - General-purpose I/O pin
  15. PTB2 - General-purpose I/O pin
  16. PTB3 - General-purpose I/O pin
  17. PTB4 - General-purpose I/O pin
  18. PTB5 - General-purpose I/O pin
  19. PTB6 - General-purpose I/O pin
  20. PTB7 - General-purpose I/O pin

Functional Features

  • High-performance processing capabilities
  • Integrated peripherals for enhanced functionality
  • Low power consumption for energy-efficient operation
  • Flexible communication interfaces for seamless connectivity
  • Analog-to-Digital Converter (ADC) for precise analog measurements
  • Timers/Counters for accurate timing and event management

Advantages and Disadvantages

Advantages

  • Compact size and industry-standard package
  • Efficient control and processing capabilities
  • Integrated peripherals enhance functionality
  • Low power consumption for energy efficiency

Disadvantages

  • Limited flash memory capacity
  • Limited RAM capacity
  • Limited number of I/O pins

Working Principles

MC68HRC908JK3CP operates based on the principles of microcontroller architecture. It executes instructions stored in its flash memory, processes data, and controls various peripherals to perform desired tasks. The microcontroller interacts with external devices through its I/O pins and communication interfaces.

Detailed Application Field Plans

MC68HRC908JK3CP finds applications in various fields, including but not limited to: - Home automation systems - Industrial control systems - Automotive electronics - Consumer electronics - Medical devices - Internet of Things (IoT) devices

Detailed and Complete Alternative Models

Some alternative models to MC68HRC908JK3CP with similar features and capabilities include: - ATmega328P by Microchip Technology - PIC16F877A by Microchip Technology - STM32F103C8T6 by STMicroelectronics - LPC1768 by NXP Semiconductors - MSP430G2553 by Texas Instruments

These alternative models offer a range of options for developers based on their specific requirements and preferences.

Word count: 530 words

Énumérez 10 questions et réponses courantes liées à l'application de MC68HRC908JK3CP dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of MC68HRC908JK3CP in technical solutions:

  1. Q: What is MC68HRC908JK3CP? A: MC68HRC908JK3CP is a microcontroller from the HC08 family, designed for embedded control applications.

  2. Q: What are the key features of MC68HRC908JK3CP? A: Some key features include an 8-bit CPU, flash memory, EEPROM, analog-to-digital converter (ADC), timers, and communication interfaces.

  3. Q: What is the maximum clock frequency supported by MC68HRC908JK3CP? A: MC68HRC908JK3CP supports a maximum clock frequency of 8 MHz.

  4. Q: Can I program MC68HRC908JK3CP using C or assembly language? A: Yes, MC68HRC908JK3CP can be programmed using both C and assembly language.

  5. Q: How much flash memory does MC68HRC908JK3CP have? A: MC68HRC908JK3CP has 4 KB of flash memory for storing program code.

  6. Q: Does MC68HRC908JK3CP have any built-in communication interfaces? A: Yes, MC68HRC908JK3CP has a serial communication interface (SCI) and a serial peripheral interface (SPI).

  7. Q: Can MC68HRC908JK3CP be used for motor control applications? A: Yes, MC68HRC908JK3CP can be used for motor control applications as it has PWM outputs and timers suitable for controlling motors.

  8. Q: Is MC68HRC908JK3CP suitable for low-power applications? A: Yes, MC68HRC908JK3CP has low-power modes and features that make it suitable for battery-powered or energy-efficient applications.

  9. Q: Can MC68HRC908JK3CP interface with external sensors? A: Yes, MC68HRC908JK3CP has analog-to-digital converters (ADC) that can be used to interface with external sensors.

  10. Q: Are there any development tools available for programming MC68HRC908JK3CP? A: Yes, there are various development tools and integrated development environments (IDEs) available for programming MC68HRC908JK3CP, such as CodeWarrior and IAR Embedded Workbench.

Please note that the answers provided here are general and may vary depending on specific requirements and application scenarios.