NXP USA Inc.
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
MC35XS3400CPNAR2
Voir les détails DataSheets

MC35XS3400CPNAR2

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Motor Controller
  • Characteristics:
    • Compact size
    • High efficiency
    • Low power consumption
  • Package: CPN (Ceramic Pin Grid Array)
  • Essence: Control and drive motor systems efficiently
  • Packaging/Quantity: Available in reels, quantity varies based on customer requirements

Specifications

  • Input Voltage Range: 8V to 18V
  • Output Current Range: 0A to 3.5A
  • Operating Temperature Range: -40°C to +125°C
  • Control Interface: PWM (Pulse Width Modulation)
  • Protection Features:
    • Overcurrent protection
    • Overtemperature protection
    • Undervoltage lockout

Detailed Pin Configuration

The MC35XS3400CPNAR2 has the following pin configuration:

  1. VCC - Power supply voltage input
  2. GND - Ground reference
  3. IN1 - Input control signal 1
  4. IN2 - Input control signal 2
  5. OUT - Motor output
  6. VREF - Reference voltage output
  7. DIAG - Diagnostic output
  8. EN - Enable control input

Functional Features

  • Efficient motor control and drive capabilities
  • Supports bidirectional motor rotation
  • Adjustable current limit for motor protection
  • Diagnostic output for fault detection
  • Enable control for power management

Advantages and Disadvantages

Advantages: - Compact size allows for easy integration into various applications - High efficiency results in reduced power consumption - Comprehensive protection features ensure motor safety - Diagnostic output aids in troubleshooting and maintenance

Disadvantages: - Limited output current range may not be suitable for high-power motor applications - Requires external control signals for operation

Working Principles

The MC35XS3400CPNAR2 is a motor controller IC that utilizes PWM control to regulate the speed and direction of a motor. It receives input control signals (IN1 and IN2) to determine the desired motor rotation. The IC then generates an output signal (OUT) to drive the motor accordingly. The VREF pin provides a reference voltage for precise control, while the DIAG pin outputs diagnostic information for fault detection.

Detailed Application Field Plans

The MC35XS3400CPNAR2 is commonly used in various motor control applications, including:

  1. Automotive sector: Electric power steering systems, HVAC blowers, windshield wipers, etc.
  2. Industrial automation: Conveyor belts, robotic arms, pumps, fans, etc.
  3. Consumer electronics: Appliances, drones, electric scooters, etc.

Alternative Models

  • MC35XS3200CPNAR2
  • MC35XS3500CPNAR2
  • MC35XS3600CPNAR2
  • MC35XS3800CPNAR2

These alternative models offer similar functionality and can be considered as replacements for the MC35XS3400CPNAR2 based on specific application requirements.

Word count: 346 words

Énumérez 10 questions et réponses courantes liées à l'application de MC35XS3400CPNAR2 dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of MC35XS3400CPNAR2 in technical solutions:

1. What is MC35XS3400CPNAR2? MC35XS3400CPNAR2 is a high-side switch designed for automotive applications, specifically for driving resistive, inductive, and capacitive loads.

2. What is the maximum voltage rating of MC35XS3400CPNAR2? The maximum voltage rating of MC35XS3400CPNAR2 is typically 40V.

3. Can MC35XS3400CPNAR2 handle high current loads? Yes, MC35XS3400CPNAR2 can handle high current loads up to 5A.

4. Is MC35XS3400CPNAR2 suitable for automotive lighting applications? Yes, MC35XS3400CPNAR2 is commonly used in automotive lighting applications such as driving LED headlights or taillights.

5. Does MC35XS3400CPNAR2 have built-in protection features? Yes, MC35XS3400CPNAR2 has various built-in protection features like overcurrent protection, thermal shutdown, and reverse battery protection.

6. Can MC35XS3400CPNAR2 be controlled using a microcontroller? Yes, MC35XS3400CPNAR2 can be easily controlled using a microcontroller through its enable pin and diagnostic output pin.

7. What is the operating temperature range of MC35XS3400CPNAR2? The operating temperature range of MC35XS3400CPNAR2 is typically -40°C to +125°C.

8. Can MC35XS3400CPNAR2 be used in both 12V and 24V automotive systems? Yes, MC35XS3400CPNAR2 is designed to work in both 12V and 24V automotive systems.

9. Does MC35XS3400CPNAR2 have short-circuit protection? Yes, MC35XS3400CPNAR2 has built-in short-circuit protection to prevent damage to the device and the load.

10. Is MC35XS3400CPNAR2 available in different package options? Yes, MC35XS3400CPNAR2 is available in various package options, including SOIC-8 and DFN-8.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.