Nexperia USA Inc.
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
74HC4016D,652
Voir les détails DataSheets

74HC4016D,652

Product Overview

Category

The 74HC4016D,652 belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used for analog switch applications.

Characteristics

  • High-speed CMOS technology
  • Low power consumption
  • Wide operating voltage range
  • Schmitt-trigger action on all inputs
  • Complies with JEDEC standard JESD7A

Package

The 74HC4016D,652 is available in a SOIC (Small Outline Integrated Circuit) package.

Essence

The essence of this product lies in its ability to provide reliable and efficient analog switching functionality.

Packaging/Quantity

The 74HC4016D,652 is typically packaged in reels and comes in quantities of 2500 units per reel.

Specifications

  • Supply Voltage Range: 2V to 6V
  • Input Voltage Range: -0.5V to VCC + 0.5V
  • Output Voltage Range: -0.5V to VCC + 0.5V
  • Operating Temperature Range: -40°C to +125°C
  • On-state Resistance: 80Ω (typical)
  • Maximum Continuous Current: ±25mA

Detailed Pin Configuration

The 74HC4016D,652 has a total of 14 pins, which are assigned specific functions as follows:

  1. Pin 1: Analog Switch Input/Output 1 (IN/OUT1)
  2. Pin 2: Analog Switch Input/Output 2 (IN/OUT2)
  3. Pin 3: Analog Switch Input/Output 3 (IN/OUT3)
  4. Pin 4: Analog Switch Input/Output 4 (IN/OUT4)
  5. Pin 5: Ground (GND)
  6. Pin 6: Analog Switch Control Input 1 (INH1)
  7. Pin 7: Analog Switch Control Input 2 (INH2)
  8. Pin 8: Analog Switch Control Input 3 (INH3)
  9. Pin 9: Analog Switch Control Input 4 (INH4)
  10. Pin 10: Supply Voltage (VCC)
  11. Pin 11: Analog Switch Enable Input (EN)
  12. Pin 12: Not Connected (NC)
  13. Pin 13: Not Connected (NC)
  14. Pin 14: Not Connected (NC)

Functional Features

  • Four independent analog switches
  • Schmitt-trigger action on control inputs for improved noise immunity
  • Low power consumption, making it suitable for battery-powered applications
  • Wide operating voltage range allows compatibility with various systems
  • Fast switching speed for efficient signal routing

Advantages and Disadvantages

Advantages

  • High-speed CMOS technology ensures fast and reliable switching performance.
  • Low power consumption extends battery life in portable devices.
  • Schmitt-trigger action on control inputs enhances noise immunity.

Disadvantages

  • Limited maximum continuous current may restrict certain high-current applications.
  • The package size may not be suitable for space-constrained designs.

Working Principles

The 74HC4016D,652 operates by utilizing its internal analog switches to connect or disconnect the input/output signals based on the control inputs. When the control input is active, the corresponding analog switch is turned on, allowing the signal to pass through. Conversely, when the control input is inactive, the analog switch is turned off, isolating the input/output from the rest of the circuit.

Detailed Application Field Plans

The 74HC4016D,652 finds application in various fields, including:

  1. Audio and video signal routing in multimedia devices
  2. Data acquisition systems
  3. Communication equipment
  4. Test and measurement instruments
  5. Industrial control systems

Detailed and Complete Alternative Models

  1. CD4016BE: Similar analog switch IC with the same pin configuration and functionality.
  2. 74HCT4016N: Analog switch IC with improved noise immunity and higher maximum continuous current.
  3. DG403DJ: Precision analog switch IC with lower on-state resistance and enhanced performance.

These alternative models can be considered based on specific requirements and design constraints.

Word count: 507 words

Énumérez 10 questions et réponses courantes liées à l'application de 74HC4016D,652 dans les solutions techniques

  1. What is the 74HC4016D,652 used for?

    • The 74HC4016D,652 is a quad bilateral switch designed for general-purpose switching applications.

  2. What are the key features of the 74HC4016D,652?

    • It features low "ON" resistance, wide operating voltage range, and high noise immunity.

  3. How many switches does the 74HC4016D,652 contain?

    • It contains four independent switches.

  4. What is the maximum voltage the 74HC4016D,652 can handle?

    • The maximum voltage it can handle is typically around 15V.

  5. Can the 74HC4016D,652 be used for audio signal switching?

    • Yes, it can be used for audio signal switching due to its low "ON" resistance.

  6. What is the typical power consumption of the 74HC4016D,652?

    • The typical power consumption is very low, making it suitable for battery-operated devices.

  7. Is the 74HC4016D,652 suitable for use in industrial environments?

    • Yes, it has high noise immunity and can be used in industrial environments.

  8. Does the 74HC4016D,652 have built-in protection features?

    • It has built-in diodes for overvoltage protection.

  9. Can the 74HC4016D,652 be cascaded for more channels?

    • Yes, multiple 74HC4016D,652 chips can be cascaded for more channels.

  10. What are some common applications of the 74HC4016D,652?

    • Common applications include analog signal switching, audio signal routing, and general-purpose switching in electronic circuits.