N25Q00AA13G1241F TR

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Non-volatile Memory
• Characteristics:
  • High-speed data transfer
  • Low power consumption
  • Large storage capacity
• Package: Surface Mount Technology (SMT)
• Essence: Flash memory device
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Memory Capacity: 1 Gbit
• Interface: Serial Peripheral Interface (SPI)
• Operating Voltage: 2.7V to 3.6V
• Operating Temperature Range: -40°C to +85°C
• Data Transfer Rate: Up to 108 MHz
• Erase/Program Time: 4 ms/256 bytes
• Data Retention: Up to 20 years
• Package Dimensions: 8 mm x 6 mm

Detailed Pin Configuration

The N25Q00AA13G1241F TR has the following pin configuration:

1. VCC - Power supply voltage
2. HOLD - Suspends ongoing operations
3. WP - Write Protect
4. RESET - Resets the device
5. SIO0 - Serial Data Input/Output 0
6. SIO1 - Serial Data Input/Output 1
7. SIO2 - Serial Data Input/Output 2
8. SIO3 - Serial Data Input/Output 3
9. CLK - Serial Clock Input
10. GND - Ground

Functional Features

• High-speed read and write operations
• Sector erase and byte/page program operations
• Quad I/O support for faster data transfer
• Advanced security features for data protection
• Efficient power management for low power consumption
• Flexible architecture for easy integration into various systems

Advantages and Disadvantages

Advantages: - Fast data transfer rate - Large storage capacity - Low power consumption - High data retention - Secure data protection features

Disadvantages: - Relatively high cost compared to other memory options - Limited endurance cycles for erase and program operations

Working Principles

The N25Q00AA13G1241F TR is based on the flash memory technology. It utilizes a floating gate transistor structure to store and retrieve data. The device uses the Serial Peripheral Interface (SPI) for communication with the host system. It supports various operations such as read, write, erase, and program, allowing for flexible data management.

Detailed Application Field Plans

The N25Q00AA13G1241F TR is widely used in various electronic devices and systems, including but not limited to:

1. Consumer Electronics:

   • Smartphones
   • Tablets
   • Digital cameras
   • Gaming consoles

2. Automotive:

   • Infotainment systems
   • Advanced driver-assistance systems (ADAS)
   • Instrument clusters

3. Industrial:

   • Internet of Things (IoT) devices
   • Industrial automation systems
   • Robotics

4. Networking:

   • Routers
   • Switches
   • Network attached storage (NAS)

Detailed and Complete Alternative Models

1. N25Q032A13ESE40E - 32 Mbit Flash Memory IC
2. N25Q064A13ESE40F - 64 Mbit Flash Memory IC
3. N25Q128A13ESE40G - 128 Mbit Flash Memory IC
4. N25Q256A13ESE40H - 256 Mbit Flash Memory IC
5. N25Q512A13ESE40I - 512 Mbit Flash Memory IC

These alternative models offer different memory capacities to suit specific application requirements.

Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.