Micro Commercial Co
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
BZT52C33-TP
Voir les détails DataSheets

BZT52C33-TP Product Overview

Introduction

The BZT52C33-TP is a semiconductor product belonging to the category of Zener diodes. This entry provides an overview of the basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the BZT52C33-TP.

Basic Information Overview

  • Category: Zener Diode
  • Use: Voltage regulation and protection in electronic circuits
  • Characteristics: Precise voltage regulation, low leakage current, and high reliability
  • Package: SOD-123 package
  • Essence: Semiconductor device for maintaining a stable voltage across a load
  • Packaging/Quantity: Available in tape and reel packaging with varying quantities

Specifications

  • Voltage: 33V
  • Power Dissipation: 500mW
  • Operating Temperature Range: -65°C to +150°C
  • Zener Impedance: 40Ω
  • Maximum Reverse Leakage Current: 100nA

Detailed Pin Configuration

The BZT52C33-TP has two pins, typically denoted as the anode and cathode. The pinout configuration is as follows: - Anode (A) - Connected to the positive terminal of the circuit - Cathode (K) - Connected to the negative terminal of the circuit

Functional Features

  • Voltage Regulation: Maintains a constant output voltage under varying load conditions
  • Overvoltage Protection: Safeguards sensitive components by limiting the voltage across them
  • Stability: Provides stable performance over a wide temperature range

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Low leakage current
  • High reliability
  • Compact size
  • Cost-effective solution for voltage regulation

Disadvantages

  • Limited power dissipation capability
  • Sensitivity to temperature variations

Working Principles

The BZT52C33-TP operates based on the principle of the Zener effect, where it maintains a nearly constant voltage across its terminals when reverse-biased at or above its breakdown voltage.

Detailed Application Field Plans

The BZT52C33-TP finds extensive use in various applications, including: - Voltage regulation in power supplies - Overvoltage protection in electronic circuits - Signal clamping and limiting - Voltage reference in precision measurement equipment

Detailed and Complete Alternative Models

Some alternative models to the BZT52C33-TP include: - BZT52C3V3-TP (3.3V) - BZT52C5V1-TP (5.1V) - BZT52C12-TP (12V) - BZT52C56-TP (56V)

In summary, the BZT52C33-TP Zener diode offers precise voltage regulation and overvoltage protection in a compact and reliable package, making it suitable for a wide range of electronic applications.

[Word Count: 398]

Énumérez 10 questions et réponses courantes liées à l'application de BZT52C33-TP dans les solutions techniques

  1. What is the BZT52C33-TP?

    • The BZT52C33-TP is a 33V Zener diode designed for voltage regulation and protection in various electronic circuits.

  2. What is the maximum power dissipation of the BZT52C33-TP?

    • The maximum power dissipation of the BZT52C33-TP is typically 500mW.

  3. What is the forward voltage drop of the BZT52C33-TP?

    • The forward voltage drop of the BZT52C33-TP is typically 0.9V at a forward current of 10mA.

  4. What are the typical applications of the BZT52C33-TP?

    • The BZT52C33-TP is commonly used for voltage regulation, overvoltage protection, and transient suppression in various technical solutions such as power supplies, communication equipment, and consumer electronics.

  5. What is the operating temperature range of the BZT52C33-TP?

    • The BZT52C33-TP has an operating temperature range of -65°C to +150°C.

  6. What is the reverse leakage current of the BZT52C33-TP?

    • The reverse leakage current of the BZT52C33-TP is typically 0.5µA at the maximum reverse voltage.

  7. Is the BZT52C33-TP RoHS compliant?

    • Yes, the BZT52C33-TP is RoHS compliant, making it suitable for use in environmentally conscious designs.

  8. What is the package type of the BZT52C33-TP?

    • The BZT52C33-TP is available in a small surface-mount SOD-123 package, which is suitable for compact circuit designs.

  9. What are the key electrical characteristics of the BZT52C33-TP?

    • The key electrical characteristics include a nominal Zener voltage of 33V, a dynamic resistance of 20Ω, and a temperature coefficient of approximately 0.07%/°C.

  10. Where can I find detailed specifications and application notes for the BZT52C33-TP?

    • Detailed specifications and application notes for the BZT52C33-TP can be found in the product datasheet provided by the manufacturer or distributor.