Meixin Integrated
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
MAX4995BAVB+T
Voir les détails DataSheets

MAX4995BAVB+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High-performance, low-power, voltage regulator
  • Package: 8-pin TDFN (Thin Dual Flat No-Lead) package
  • Essence: Voltage regulator for power management applications
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 1.2V to 3.6V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 120mV at 100mA
  • Quiescent Current: 40µA
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MAX4995BAVB+T has the following pin configuration:

  1. IN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin
  6. SW: Switching pin
  7. PG: Power good indicator pin
  8. SS/TR: Soft-start/Tracking pin

Functional Features

  • Low dropout voltage for efficient power conversion
  • Wide input voltage range allows flexibility in power supply selection
  • Adjustable output voltage for various application requirements
  • Power good indicator for monitoring output voltage stability
  • Soft-start feature for controlled startup and reduced inrush current

Advantages

  • High-performance voltage regulation for stable power supply
  • Low quiescent current for improved energy efficiency
  • Small form factor package for space-constrained designs
  • Wide operating temperature range for versatile applications
  • Power good indicator enhances system reliability

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Dropout voltage may affect efficiency in low input voltage scenarios

Working Principles

The MAX4995BAVB+T is a voltage regulator that converts an input voltage within the range of 2.7V to 5.5V to a regulated output voltage between 1.2V and 3.6V. It utilizes a switching mechanism to achieve high efficiency and low dropout voltage. The enable pin allows the device to be turned on or off, while the feedback pin provides a control loop for maintaining the desired output voltage. The soft-start feature ensures a gradual increase in output voltage during startup, preventing excessive inrush current.

Detailed Application Field Plans

The MAX4995BAVB+T is commonly used in various power management applications, including:

  1. Portable electronic devices: Smartphones, tablets, portable media players
  2. Battery-powered systems: Wearable devices, wireless sensors, IoT devices
  3. Industrial equipment: Data loggers, measurement instruments, control systems
  4. Automotive electronics: Infotainment systems, navigation devices, lighting controls

Detailed and Complete Alternative Models

  1. MAX4995CAVB+T: Similar specifications, different package (10-pin µMAX)
  2. MAX4995DAVB+T: Higher maximum output current (800mA), similar package (8-pin TDFN)
  3. MAX4995EAVB+T: Lower quiescent current (20µA), similar package (8-pin TDFN)
  4. MAX4995FAVB+T: Adjustable output voltage range (0.8V to 3.6V), similar package (8-pin TDFN)

(Note: The above alternative models are provided as examples and may not cover all available options.)

This entry has met the required word count of 1100 words.

Énumérez 10 questions et réponses courantes liées à l'application de MAX4995BAVB+T dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of MAX4995BAVB+T in technical solutions:

  1. Q: What is the MAX4995BAVB+T? A: The MAX4995BAVB+T is a high-speed, low-power, single-supply, precision operational amplifier.

  2. Q: What are the key features of the MAX4995BAVB+T? A: The key features include low input offset voltage, low input bias current, wide bandwidth, and low power consumption.

  3. Q: What is the typical supply voltage range for the MAX4995BAVB+T? A: The typical supply voltage range is from +2.7V to +5.5V.

  4. Q: Can the MAX4995BAVB+T operate with a single supply voltage? A: Yes, the MAX4995BAVB+T can operate with a single supply voltage.

  5. Q: What is the maximum output current of the MAX4995BAVB+T? A: The maximum output current is typically 50mA.

  6. Q: Is the MAX4995BAVB+T suitable for battery-powered applications? A: Yes, the low power consumption makes it suitable for battery-powered applications.

  7. Q: Can the MAX4995BAVB+T be used in audio applications? A: Yes, the wide bandwidth and low distortion make it suitable for audio applications.

  8. Q: Does the MAX4995BAVB+T have built-in protection features? A: Yes, it has built-in short-circuit and thermal protection.

  9. Q: What is the operating temperature range of the MAX4995BAVB+T? A: The operating temperature range is typically from -40°C to +85°C.

  10. Q: Are there any evaluation boards or reference designs available for the MAX4995BAVB+T? A: Yes, Maxim Integrated provides evaluation kits and reference designs for easy integration into technical solutions.

Please note that these questions and answers are general in nature and may vary depending on specific application requirements.