Meixin Integrated
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
MAX4174BKEUK-T
Voir les détails DataSheets

MAX4174BKEUK-T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Amplifier
  • Characteristics: High precision, low noise, wide bandwidth
  • Package: SOT23-5
  • Essence: Operational amplifier
  • Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

  • Supply Voltage Range: 2.7V to 5.5V
  • Input Offset Voltage: ±0.5mV (maximum)
  • Gain Bandwidth Product: 1MHz (typical)
  • Input Bias Current: 1pA (typical)
  • Output Current: 50mA (maximum)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MAX4174BKEUK-T has a SOT23-5 package with the following pin configuration:

  1. OUT: Output pin
  2. IN-: Inverting input pin
  3. IN+: Non-inverting input pin
  4. V-: Negative supply voltage pin
  5. V+: Positive supply voltage pin

Functional Features

  • Rail-to-Rail Output: The MAX4174BKEUK-T provides a rail-to-rail output swing, allowing it to operate with a wide range of input and output voltages.
  • Low Noise: With a low input bias current and low offset voltage, this amplifier minimizes noise interference in sensitive applications.
  • Wide Bandwidth: The high gain bandwidth product ensures accurate amplification of signals across a wide frequency range.

Advantages and Disadvantages

Advantages: - High precision amplification - Low noise interference - Wide operating temperature range - Small package size for space-constrained designs

Disadvantages: - Limited output current capability - Requires external components for specific applications

Working Principles

The MAX4174BKEUK-T is an operational amplifier that amplifies the difference between its inverting and non-inverting inputs. It operates by using a feedback mechanism to adjust the output voltage based on the input signal. The rail-to-rail output allows for accurate amplification of signals near the supply voltage limits.

Detailed Application Field Plans

The MAX4174BKEUK-T is commonly used in various applications, including: - Sensor signal conditioning - Audio amplification - Battery-powered devices - Portable instrumentation - Industrial control systems

Detailed and Complete Alternative Models

  1. MAX4172EUK: Similar specifications and package as MAX4174BKEUK-T, but with a lower gain bandwidth product.
  2. MAX4173BKEUK: Higher output current capability compared to MAX4174BKEUK-T, suitable for driving heavier loads.
  3. MAX4175EUK: Lower supply voltage range, ideal for low-power applications.

These alternative models offer different features and performance characteristics to suit specific design requirements.

Word count: 275 words

Énumérez 10 questions et réponses courantes liées à l'application de MAX4174BKEUK-T dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of MAX4174BKEUK-T in technical solutions:

  1. Q: What is MAX4174BKEUK-T? A: MAX4174BKEUK-T is a high-side current-sense amplifier designed for precision measurement of bidirectional currents.

  2. Q: What is the operating voltage range of MAX4174BKEUK-T? A: The operating voltage range of MAX4174BKEUK-T is typically between 2.7V and 28V.

  3. Q: What is the maximum input offset voltage of MAX4174BKEUK-T? A: The maximum input offset voltage of MAX4174BKEUK-T is typically 500µV.

  4. Q: Can MAX4174BKEUK-T measure both positive and negative currents? A: Yes, MAX4174BKEUK-T can accurately measure both positive and negative currents.

  5. Q: What is the gain accuracy of MAX4174BKEUK-T? A: The gain accuracy of MAX4174BKEUK-T is typically within ±0.5%.

  6. Q: Does MAX4174BKEUK-T have built-in protection features? A: Yes, MAX4174BKEUK-T has built-in overvoltage and reverse-voltage protection.

  7. Q: What is the bandwidth of MAX4174BKEUK-T? A: The bandwidth of MAX4174BKEUK-T is typically 1MHz.

  8. Q: Can MAX4174BKEUK-T operate in harsh environments? A: Yes, MAX4174BKEUK-T is designed to operate in extended temperature ranges (-40°C to +125°C) and is suitable for harsh environments.

  9. Q: What is the package type of MAX4174BKEUK-T? A: MAX4174BKEUK-T is available in a 5-pin SOT23 package.

  10. Q: What are some typical applications of MAX4174BKEUK-T? A: MAX4174BKEUK-T is commonly used in battery monitoring, power management systems, motor control, and current sensing applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.