Littelfuse Inc.
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
P2706UBRP
Voir les détails DataSheets

P2706UBRP

Product Overview

Category

The P2706UBRP belongs to the category of integrated circuits.

Use

It is used as a voltage regulator and power management solution in electronic devices.

Characteristics

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.8V to 24V
  • Maximum Output Current: 3A
  • Low Dropout Voltage
  • Overcurrent and Thermal Protection

Package

The P2706UBRP is available in a compact and heat-dissipating TO-220 package.

Essence

This product serves as an efficient and reliable voltage regulation component for various electronic applications.

Packaging/Quantity

The P2706UBRP is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 0.8V to 24V
  • Output Current: Up to 3A
  • Dropout Voltage: 0.5V at 1A
  • Quiescent Current: 100µA
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: TO-220

Detailed Pin Configuration

The P2706UBRP features a standard TO-220 pin configuration: 1. Input Voltage (VIN) 2. Ground (GND) 3. Output Voltage (VOUT)

Functional Features

  • Wide Input Voltage Range
  • Adjustable Output Voltage
  • Overcurrent and Thermal Protection
  • Low Dropout Voltage
  • High Efficiency

Advantages

  • Versatile input and output voltage ranges
  • Robust overcurrent and thermal protection
  • Compact and heat-dissipating package

Disadvantages

  • Limited maximum output current compared to some alternative models
  • Higher dropout voltage under heavy loads

Working Principles

The P2706UBRP operates by regulating the input voltage to provide a stable output voltage, ensuring consistent power supply to connected electronic components. It utilizes internal circuitry to monitor and adjust the output voltage, while also incorporating protective features to safeguard against overcurrent and excessive heat.

Detailed Application Field Plans

The P2706UBRP is well-suited for a wide range of applications, including: - Battery-powered devices - Automotive electronics - Industrial control systems - Consumer electronics - LED lighting systems

Detailed and Complete Alternative Models

Some alternative models to consider include: - P2705UBRP: Similar specifications with a lower output current capability - P2707UBRP: Higher output current capacity with slightly different input/output voltage ranges - P2708UBRP: Enhanced thermal performance and extended operating temperature range

In conclusion, the P2706UBRP offers a versatile and reliable voltage regulation solution for various electronic applications, with its wide input/output voltage ranges and built-in protection features making it a valuable component in power management designs.

Word Count: 411

Énumérez 10 questions et réponses courantes liées à l'application de P2706UBRP dans les solutions techniques

  1. What is P2706UBRP?

    • P2706UBRP is a high-speed, low-power, quad-channel digital isolator designed for use in industrial automation, motor control, and other technical solutions.

  2. What are the key features of P2706UBRP?

    • The key features of P2706UBRP include 100 Mbps data rate, reinforced isolation up to 5 kV, low power consumption, and wide operating temperature range.

  3. How is P2706UBRP typically used in industrial automation?

    • P2706UBRP is commonly used in industrial automation for isolating communication interfaces, such as SPI, I2C, or UART, to ensure reliable and safe data transmission in harsh environments.

  4. Can P2706UBRP be used in motor control applications?

    • Yes, P2706UBRP is suitable for motor control applications where isolation between control circuits and power circuits is necessary to prevent electrical noise and voltage transients.

  5. What are the advantages of using P2706UBRP in technical solutions?

    • The advantages of using P2706UBRP include its high-speed data transfer, robust isolation capabilities, low power consumption, and compatibility with various communication interfaces.

  6. Is P2706UBRP compliant with industry standards for safety and reliability?

    • Yes, P2706UBRP complies with industry standards for safety and reliability, including UL, CSA, and VDE certifications for reinforced isolation.

  7. What is the recommended operating voltage range for P2706UBRP?

    • The recommended operating voltage range for P2706UBRP is typically from 3.0V to 5.5V, making it compatible with a wide range of system voltages.

  8. Are there any application notes or reference designs available for integrating P2706UBRP into technical solutions?

    • Yes, application notes and reference designs are available to assist engineers in integrating P2706UBRP into their specific technical solutions, providing guidance on layout, signal integrity, and performance optimization.

  9. Can P2706UBRP be used in temperature-critical environments?

    • Yes, P2706UBRP is designed to operate reliably in temperature-critical environments, with a wide operating temperature range from -40°C to 125°C.

  10. Where can I find more detailed technical specifications and documentation for P2706UBRP?

    • Detailed technical specifications, datasheets, and application information for P2706UBRP can be found on the manufacturer's website or by contacting their technical support team.