Linear Technology/QD Devices
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
LTC6081CMS8#PBF
Voir les détails DataSheets

LTC6081CMS8#PBF

Product Overview

Category

LTC6081CMS8#PBF belongs to the category of operational amplifiers (op-amps).

Use

This product is commonly used in electronic circuits for amplifying and processing analog signals.

Characteristics

  • Low input offset voltage
  • Rail-to-rail input and output
  • Low quiescent current
  • Wide supply voltage range
  • Small package size

Package

LTC6081CMS8#PBF is available in an 8-pin MSOP (Mini Small Outline Package) format.

Essence

The essence of LTC6081CMS8#PBF lies in its ability to provide high-performance amplification and signal conditioning in various applications.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage Range: ±2.5V to ±12V
  • Input Offset Voltage: 50μV (maximum)
  • Quiescent Current: 40μA (typical)
  • Gain Bandwidth Product: 3MHz (typical)
  • Slew Rate: 1.6V/μs (typical)

Detailed Pin Configuration

  1. V+ (Positive Power Supply)
  2. IN- (Inverting Input)
  3. IN+ (Non-Inverting Input)
  4. V- (Negative Power Supply)
  5. OUT (Output)
  6. NC (No Connection)
  7. NC (No Connection)
  8. GND (Ground)

Functional Features

  • Low input offset voltage ensures accurate signal amplification.
  • Rail-to-rail input and output allow for maximum signal swing.
  • Low quiescent current minimizes power consumption.
  • Wide supply voltage range enables flexibility in various applications.
  • Small package size saves board space.

Advantages and Disadvantages

Advantages

  • High precision amplification
  • Versatile application range
  • Low power consumption
  • Compact package size

Disadvantages

  • Limited output current capability
  • Higher cost compared to some alternatives

Working Principles

LTC6081CMS8#PBF operates based on the principles of differential amplification. It takes the difference between the non-inverting and inverting input voltages and amplifies it with high gain. The amplified output is then available at the OUT pin.

Detailed Application Field Plans

LTC6081CMS8#PBF finds applications in various fields, including: 1. Sensor signal conditioning 2. Audio amplification 3. Industrial automation 4. Medical instrumentation 5. Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models to LTC6081CMS8#PBF are: - AD8628 - MCP6002 - MAX4239

These models offer similar functionality and can be considered as alternatives depending on specific requirements.

Word count: 330 words

Énumérez 10 questions et réponses courantes liées à l'application de LTC6081CMS8#PBF dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of LTC6081CMS8#PBF in technical solutions:

Q1: What is LTC6081CMS8#PBF? A1: LTC6081CMS8#PBF is a high voltage, low power operational amplifier (op-amp) manufactured by Linear Technology (now part of Analog Devices). It is commonly used in various technical applications.

Q2: What is the supply voltage range for LTC6081CMS8#PBF? A2: The supply voltage range for LTC6081CMS8#PBF is typically between 2.7V and 36V.

Q3: What is the input offset voltage of LTC6081CMS8#PBF? A3: The input offset voltage of LTC6081CMS8#PBF is typically around 500µV.

Q4: What is the gain bandwidth product of LTC6081CMS8#PBF? A4: The gain bandwidth product of LTC6081CMS8#PBF is typically around 1 MHz.

Q5: Can LTC6081CMS8#PBF operate in single-supply configurations? A5: Yes, LTC6081CMS8#PBF can operate in both single-supply and split-supply configurations.

Q6: What is the input bias current of LTC6081CMS8#PBF? A6: The input bias current of LTC6081CMS8#PBF is typically around 20nA.

Q7: Does LTC6081CMS8#PBF have built-in protection features? A7: Yes, LTC6081CMS8#PBF has built-in protection features such as reverse battery protection and thermal shutdown.

Q8: What is the output current capability of LTC6081CMS8#PBF? A8: The output current capability of LTC6081CMS8#PBF is typically around 30mA.

Q9: Can LTC6081CMS8#PBF be used in low-power applications? A9: Yes, LTC6081CMS8#PBF is designed for low power consumption and can be used in low-power applications.

Q10: What are some typical applications of LTC6081CMS8#PBF? A10: Some typical applications of LTC6081CMS8#PBF include sensor signal conditioning, battery-powered systems, industrial control, and portable instrumentation.

Please note that the specifications mentioned above are approximate and may vary depending on the specific device and manufacturer's datasheet.