Linear Technology/QD Devices
L'image peut être une représentation.
Voir les spécifications pour les détails du produit.
LTC3025EDC-3#TRMPBF
Voir les détails DataSheets

LTC3025EDC-3#TRMPBF

Product Overview

Category

The LTC3025EDC-3#TRMPBF belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Low dropout voltage: The LTC3025EDC-3#TRMPBF has a low dropout voltage, making it suitable for applications where a small voltage difference between input and output is required.
  • High efficiency: This voltage regulator offers high efficiency, minimizing power loss during voltage regulation.
  • Small package size: The LTC3025EDC-3#TRMPBF comes in a compact package, making it suitable for space-constrained applications.
  • Low quiescent current: This product has a low quiescent current, reducing power consumption when the load is light.

Package

The LTC3025EDC-3#TRMPBF is available in a small DFN (Dual Flat No-leads) package.

Essence

The essence of the LTC3025EDC-3#TRMPBF lies in its ability to regulate voltage with high efficiency and low dropout voltage, while consuming minimal power.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V to 6V
  • Output Voltage: 3.3V
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 20µA
  • Maximum Output Current: 150mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The LTC3025EDC-3#TRMPBF has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage ensures efficient voltage regulation even with small input-output voltage differences.
  • Wide input voltage range allows for flexibility in various applications.
  • Low quiescent current minimizes power consumption during light load conditions.
  • Enable pin provides control over the regulator's operation.

Advantages and Disadvantages

Advantages

  • High efficiency voltage regulation
  • Small package size
  • Low quiescent current
  • Wide input voltage range

Disadvantages

  • Limited maximum output current (150mA)

Working Principles

The LTC3025EDC-3#TRMPBF is a linear voltage regulator that uses a P-channel MOSFET pass transistor to regulate the output voltage. It operates by comparing the feedback voltage from the output with a reference voltage, adjusting the pass transistor to maintain a stable output voltage.

Detailed Application Field Plans

The LTC3025EDC-3#TRMPBF finds application in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - IoT (Internet of Things) devices - Wearable devices - Embedded systems

Detailed and Complete Alternative Models

  1. LT1763 - Low dropout voltage regulator with adjustable output voltage.
  2. LM1117 - Popular linear voltage regulator with various fixed output voltage options.
  3. ADP3339 - High current, low dropout voltage regulator suitable for demanding applications.
  4. TPS7A47 - Ultra-low noise, high PSRR (Power Supply Rejection Ratio) voltage regulator.

These alternative models offer similar functionality and can be considered as substitutes for the LTC3025EDC-3#TRMPBF depending on specific requirements and constraints.

Word count: 457 words

Énumérez 10 questions et réponses courantes liées à l'application de LTC3025EDC-3#TRMPBF dans les solutions techniques

Sure! Here are 10 common questions and answers related to the application of LTC3025EDC-3#TRMPBF in technical solutions:

  1. Q: What is the LTC3025EDC-3#TRMPBF? A: The LTC3025EDC-3#TRMPBF is a low dropout (LDO) linear regulator IC that provides a regulated output voltage of 3.0V.

  2. Q: What is the input voltage range for LTC3025EDC-3#TRMPBF? A: The input voltage range for LTC3025EDC-3#TRMPBF is typically between 2.7V and 6.5V.

  3. Q: What is the maximum output current of LTC3025EDC-3#TRMPBF? A: The maximum output current of LTC3025EDC-3#TRMPBF is 150mA.

  4. Q: Can I use LTC3025EDC-3#TRMPBF to power microcontrollers or other digital ICs? A: Yes, LTC3025EDC-3#TRMPBF can be used to power microcontrollers, digital ICs, and other low-power devices.

  5. Q: Does LTC3025EDC-3#TRMPBF have built-in thermal shutdown protection? A: Yes, LTC3025EDC-3#TRMPBF has built-in thermal shutdown protection to prevent overheating.

  6. Q: Is LTC3025EDC-3#TRMPBF suitable for battery-powered applications? A: Yes, LTC3025EDC-3#TRMPBF is suitable for battery-powered applications due to its low quiescent current and low dropout voltage.

  7. Q: Can I use LTC3025EDC-3#TRMPBF in automotive applications? A: Yes, LTC3025EDC-3#TRMPBF is suitable for automotive applications as it can operate within the required temperature range and has low EMI emissions.

  8. Q: Does LTC3025EDC-3#TRMPBF require any external components for operation? A: Yes, LTC3025EDC-3#TRMPBF requires a minimum of two external capacitors for stability and proper operation.

  9. Q: What is the typical dropout voltage of LTC3025EDC-3#TRMPBF? A: The typical dropout voltage of LTC3025EDC-3#TRMPBF is 200mV at 150mA load current.

  10. Q: Can I use LTC3025EDC-3#TRMPBF in space-constrained applications? A: Yes, LTC3025EDC-3#TRMPBF is available in a small DFN package, making it suitable for space-constrained applications.

Please note that these answers are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information and application-specific guidelines.